Affiliate Disclosure: Rotorm.com sometimes gets paid for listings, through sponsors or affiliate programs like Amazon, Optics Planet, Lucky Gunner, Brownells, Cabelas, Rainier Arms, 5.11 Tactical, Bass Pro Shop, etс. Clicking a link helps keep Rotorm.com free, at no extra cost to you!

About the author: Each article on our site is written by experts in survival and tactical equipment, gun enthusiasts, extreme travelers, military, law enforcement and desperate professionals, read about the author at the bottom of the article or visit "About Us" page.

Note: The views and opinions expressed in this article are those of the authors and do not necessarily reflect the official policy or position of any agency.

This review will help you to evaluate the advantages and disadvantages of the muzzle devices bored for 5.56x45mm NATO, .223 Remington, and 9mm Luger for AR rifles.

Best AR 15 Compensator - Editor's Choice
Why do we need AR 15 compensator 800?

Recoil compensators minimize muzzle rise, providing prompt sight realignment on the target and better accuracy. While shooting, the gases are redirected from the forward to the sides by the burning powder pressure out of the firearm muzzle, weakening the rearward propulsion and making the recoil twice less to take care of the shoulder.

Best AR 15 Compensator | AR-15 Compensator Review Guide

ImageProductBrand
Bravo GFC-MOD-0 BCM Gunfighter AR-15 CompensatorBravo CompanyBUY
Guntec USA AR-15 Cal Multi Port Steel AR 15 CompensatorGuntec USABUY
Strike Industries Triple Crown 223/5.56 AR 15 CompensatorStrike IndustriesBUY
Bravo Company MFG Ar-15 Compensator Mod 1Bravo CompanyBUY
Walker Defense Research AR-15 NERO Hybrid AR 15 CompensatorWalker DefenseBUY
Cmmg Inc Cmmg AR 15 CompensatorCmmg IncBUY
Guntec USA Micro Multi Port AR Compensator GEN 2Guntec USABUY
Manticore Arms Nightbrake Compensator For AR-15 MA-1228Manticore ArmsBUY
Guntec USA AR-15 Muzzle Comp with QD Blast ShieldGuntec USABUY
Guntec USA AR-15 Multi-Port Stainless Steel CompensatorGuntec USABUY
Ultradyne Apollo S AR 15 CompensatorUltradyneBUY
Guntec USA AR Hellfire Gen 2 AR 15 CompensatorGuntec USABUY
VG6 Precision EPSILON 9mm AR 15 CompensatorVG6 PrecisionBUY
Yankee Hill Machine Phantom 5.56 Aggressive AR 15 CompensatorYankee Hill MachineBUY
Manticore Arms Afterburner Linear AR 15 CompensatorManticore ArmsBUY
Ultradyne Lithium PCC AR 15 Compensator Muzzle BrakeUltradyneBUY
Guntec Usa Ar9 Micro AR 15 CompensatorGuntec USABUY
CMMG Inc A2 AR 15 CompensatorCMMG IncBUY
JP Enterprises Barrel Tactical AR 15 CompensatorJP EnterprisesBUY
Strike Industries 223 King AR 15 CompensatorStrike IndustriesBUY

#1 Bravo GFC-MOD-0 BCM Gunfighter AR-15 Compensator

Bravo GFC-MOD-0 BCM Gunfighter AR-15 Compensator

Specification

Caliber: 5.56x45mm NATO
Threads per Inch: 1/2×28

Bravo Company MFG designed a compensator with six oval longitudinal cutouts and the star-shaped internal bore, helping gases exit and making for the projectile enough clearance.
Mod 0 is a bit shorter than Mod 1 (featuring less recoil mitigation), in the rest they are similar in performance. The Gunfighter Compensator is crafted from durable Stainless Steel with a Black finish, constructed for AR-15, suitable for a Sig m400 thread pistol as well. The compensator ships with a crush washer to get it positioned duly.

What I liked:
  • Long-lasting materials;
  • The quality and finish are great;
  • Helps with recoil;
  • The Mod 0 efficiently mitigates muzzle climb, not emitting a serious concussive blast;
  • Looks stylish installed.
What I didn’t like:
  • Side blast.

#2 Guntec USA AR-15 Cal Multi Port Steel AR 15 Compensator

Guntec USA AR-15 Cal Multi Port Steel AR 15 Compensator

Specification

Caliber: 5.56x45mm NATO, .223 Remington
Threads per Inch: 1/2×28

The Guntec USA offers 2 models of Multi-Port Compensator for AR-15 rifles in Black and Flat Dark Earth colors. The multi-Port threaded compensator is outfitted with two porting slots on the top and three porting holes on each side to mitigate muzzle climb and recoil. The Guntec constructed all-steel muzzle devices with an Anodized finish. This Guntec comes with a locking nut for easy timing.

What I liked:
  • Made in the USA;
  • Lower recoil helps to hold on to the target, making faster follow-up shots;
  • Multi-Port Compensator is efficient for recoil and muzzle rise;
  • No ports on the bottom, appropriate for shooting prone.
What I didn’t like:
  • None yet.

#3 Strike Industries Triple Crown 223/5.56 AR 15 Compensator

Strike Industries Triple Crown 223/5.56 AR 15 Compensator

Specification

Caliber: 5.56x45mm NATO
Threads per Inch: 1/2×28

The Strike Industries developed a three-chamber compensator with Triple Crown; such special design allows significantly to diminish felt recoil and minimize muzzle rise due to the top gas ports as well. The SI Triple Crown Compensators are positioned as an efficient alternative for a compensator-muzzle brake combination.

What I liked:
  • Value for money;
  • Aggressive frontal crowned-edge can be used for self-defense or as a support for wire cutting capability;
  • Easy aligning using just the crush washer;
  • Increases accuracy without causing more muzzle flash;
  • Looks sleek and innovative;
  • Performs well;
  • Lightweight.
What I didn’t like:
  • A bit loud for those around the shooter.

#4 Bravo Company MFG Ar-15 Compensator Mod 1

Bravo Company MFG Ar-15 Compensator Mod 1

Specification

Caliber: 5.56x45mm NATO
Threads per Inch: 1/2×28
Length: 1.7 in

Mod 1 is longer than Mod 0 (performing better recoil reduction), the rest performances are the same. These Bravo compensators are manufactured from rugged Stainless Steel, designed for AR-15 rifles. Bravo Company MFG developed compensators with the star-shape internal bore and the oval longitudinal cutouts of a bit different width, making gases exit and leaving for the projectile enough clearance, resulting in minimizing felt recoil and muzzle climb, providing faster target acquisition. This compensator is considered as a tactical one but can be used in competitions as well. The MFG comp is equipped with a spot to pin and weld to a short barrel to make it to legal length.

What I liked:
  • Mitigates recoil even better than the Mod 0;
  • The pre-drilled hole simplifies mounting while attaching to a barrel;
  • The finish is quality;
  • Significantly reduces muzzle rise without emitting a noticeable concussive blast;
  • Heavy-duty materials;
  • Easy install and time.
What I didn’t like:
  • A bit expensive.

#5 Walker Defense Research AR-15 NERO Hybrid AR 15 Compensator

Walker Defense Research AR-15 NERO Hybrid AR 15 Compensator

Specification

Caliber: .223 Remington, .224 Valkyrie, 5.56x45mm NATO
Threads per Inch: 1/2×28
Length: 2.6 in

Walker Defense Research (WDR), while designing the muzzle device, decided to convert fully the AR-15 recoil impulse into a soft rearward push with zero muzzle rise and controlled concussion. Even with such performance, this muzzle device is still suitable for tactical applications. The WDR developed the NERO 556 from the beginning without any design restrictions, using computational fluid dynamics and direct metal laser sintering (DMLS is known as 3D printed metal). In the NERO 556 Hybrid utilized materials, such as Inconel and a nickel-chromium superalloy, which are common for jet engines and rocket production. The muzzle devices are serialized for Quality control. The NERO 556 is outfitted with a pre-drilled hole for pinning and welding to a 14.5 in the barrel.

What I liked:
  • Significant recoil absorbing;
  • Due to the innovative technologies a nickel-chromium superalloy and Inconel are used in the muzzle brake manufacture;
  • Weight and balance;
  • The NERO 556, installed to the AR Platform, Israel Weapon Industries (IWI), ensures a perfect level of manageability and speed both at combat and competition;
  • Flat-shooting experience due to the eliminated muzzle climb.
What I didn’t like:
  • A bit heavy.

#6 Cmmg Inc Cmmg AR 15 Compensator

Cmmg Inc Cmmg AR 15 Compensator

Specification

Caliber: 9 mm
Threads per Inch: 1/2×36
Height: 1.25 in
Width: 3.15 in

The Cmmg Compensator is bored for 9mm caliber for AR-15 rifles with threaded barrels (1/2-36). The Cmmg company manufactured single-chamber, ported muzzle brakes, taking the legendary AK74 style brake as a sample. This compressor ensures effective reduction of recoil and muzzle climb.

What I liked:
  • Lifetime warranty;
  • Fast follow-up shots;
  • A Crush Washer is included;
  • Easy installation and timing.
What I didn’t like:
  • Not yet rated.

#7 Guntec USA Micro Multi Port AR Compensator GEN 2

Guntec USA Micro Multi Port AR Compensator GEN 2

Specification

Caliber: .223 Remington, 5.56x45mm NATO
Threads per Inch: 1/2×28
Length: 1.5 in
Weight: 1.6 oz

Gen 2 Micro Multi-Port threaded compensator is designed with two porting slots on each side and one porting hole on the top to mitigate recoil and muzzle climb. The Guntec manufactured this muzzle device with all-steel construction, covered with Matte Black Nitride. This Guntec compensator comes with a crush washer for timing.

What I liked:
  • Made in the USA;
  • Gen 2 Design;
  • Reasonable price;
  • Multi-Port muzzle device decreases muzzle rise and recoil;
  • The bottom part is without ports that is convenient for shooting prone;
  • Lower recoil allows to quicken the follow-up shots and hold on to the target.
What I didn’t like:
  • Big block, not micro at all: almost twice as wide as an a2 birdcage brake (the width is almost equal to the length of 1.5 in);
  • The hole is so big, it looks like a .30 cal brake.

#8 Manticore Arms Nightbrake Compensator For AR-15 MA-1228

Manticore Arms Nightbrake Compensator For AR-15 MA-1228

Specification

Caliber: 7.62x51mm NATO
Threads per Inch: 1/2×28
Height: 2.10 in
Width: 2.85 in
Length: 4.90 in

The Nightbrake compensator delivers recoil diminish and muzzle rise minimization. Manticore Arms crafted muzzle brakes from steel (8620) with heat-treated Rockwell (50C) with Black Oxide Finish. The muzzle device is constructed with 18 ports distributed on the top unit half allowing to stabilize and decrease exiting gas pressure, at the same time the bottom part is made without ports to prevent dust signature. This muzzle device is marked “MA” because it is manufactured in specialized factories and 922r compliant parts. The Nightbrake compensator clears any projectile up to 0.311 caliber or 7.62 mm. A crush washer comes with the compensator.

What I liked:
  • Manufactured in the USA;
  • 922r compliant part;
  • Sturdy material;
  • Well-built construction;
  • Easy to install due to the included a crush washer.
What I didn’t like:
  • Not yet rated.

#9 Guntec USA AR-15 Muzzle Comp with QD Blast Shield

Guntec USA AR-15 Muzzle Comp with QD Blast Shield

Specification

Caliber: .223 Remington, 5.56x45mm NATO
Threads per Inch: 1/2×28
Length: 2.5 in
Weight: 9.7 oz
Diameter: 1.5 in

Guntec manufacture specializes in the accessories for AR-15 Pistols: AR-15, AR-308, and AR 9mm. The Guntec USA offers 2 models of Muzzle Compensator for AR-15 rifles in Nitride and Flat Dark Earth colors. Muzzle brake and QD blast shield are crafted from steel with a Nitride finish. The Guntec designed a proprietary thread, so this muzzle compensator should be assembled only with the included QD blast shield, and can’t be compatible with other suppressors. If you need to have a lighter device, you can take the blast shield off. This Guntec muzzle device forces the sound waves to move forward instead of on the sides and does not affect accuracy.

What I liked:
  • Made in the USA (Scottsdale, AZ);
  • Diminishes felt concussion majorly at close range;
  • Long-lasting Nitride Finish;
  • Awesome look;
  • Enhances overall performance;
  • Easy mounting and upkeep.
What I didn’t like:
  • A little heavy.

#10 Guntec USA AR-15 Multi-Port Stainless Steel Compensator

Guntec USA AR-15 Multi-Port Stainless Steel Compensator

Specification

Caliber: 9mm Luger, .223 Remington
Threads per Inch: 1/2×28
Length: 2.3 in
Weight: 3.7 oz

The Guntec USA engineered Multi-Port Compensators suitable for AR-15 strict use at the range or on the hunting grounds. This muzzle device features all Stainless-Steel construction with porting ditches on the top and three porting apertures on the sides to mitigate muzzle climb and recoil. These Guntec Stainless Steel Compensators allow you to keep on target and make the follow-up shots quicker.

What I liked:
  • Enhances precision;
  • Made in the USA;
  • Stylish design;
  • Easy mounting and handling.
What I didn’t like:
  • Not rated yet.

#11 Ultradyne Apollo S AR 15 Compensator

Ultradyne Apollo S AR 15 Compensator

Specification

Caliber: 5.56x45mm NATO, 6.5mm Creedmoor
Threads per Inch: 1/2×28, 5/8×24
Weight: 5.2 oz, 5.4 oz
Outside Diameter .975

The Ultradyne manufactured two models of compensator from stainless steel (416) with Salt Bath Nitride in Black and Black Nitride finishes. For better timing, the shrouded timing nut covers the gap between the brake to the barrel (necessary size .925). The Apollo S muzzle device provides a balance between sufficient recoil mitigation and less aggressive gas out letting not prevent the muzzle rise elimination. The Ultradyne compensator is appropriate for shooters who want noticeable felt recoil reduction with a less perceived blast.

What I liked:
  • Comes with a timing nut for easy installation;
  • Comfortable on the shoulder;
  • Perfect fit and finish;
  • Not bulky;
  • Delivers maximum recoil control.
What I didn’t like:
  • Can blow off everything on the sides.

#12 Guntec USA AR Hellfire Gen 2 AR 15 Compensator

Guntec USA AR Hellfire Gen 2 AR 15 Compensator

Specification

Caliber: 9mm Luger; 5.56x45mm NATO, .223 Remington
Threads per Inch: 1/2×36; 1/2×28
Length: 2.4 in
Outside Diameter: 1.4 in
Total Weight: 5.8 oz (Muzzle brake and Blast Shield)

The Guntec USA developed two models of AR-15 Muzzle Compensators, depending on the barrel thread: for 1/2×36 and 1/2×28. The Hellfire muzzle brake and QD blast shield are manufactured from steel with a Nitride finish. As the Guntec compensators are outfitted with proprietary threads, they are compatible only with the QD blast shield, coming with it, and can’t fit other suppressors. This Hellfire muzzle set is lighter than the AR-15 Muzzle Comp with QD Blast Shield. These muzzle devices are not pre-drilled for pin and weld.

What I liked:
  • Gen 2 Design;
  • Made in the USA (Scottsdale, AZ);
  • Durable Nitride Finish;
  • Decreases felt concussion at close range;
  • Easy installation and handling;
  • Crush Washer is included;
  • Looks modern;
  • Improves overall performance.
What I didn’t like:
  • Not rated yet.

#13 VG6 Precision EPSILON 9mm AR 15 Compensator

VG6 Precision EPSILON 9mm AR 15 Compensator

Specification

Caliber: 9mm Luger
Threads per Inch: 1/2×28
Length: 2.21 in
Weight: 2.5 oz

VG6 Precision engineered two models of EPSILON 9mm muzzle device with Bead Blasted Stainless Steel finish, Steel color and Black Nitride finish, Black color. The EPSILON is a three-in-one muzzle device, combining features of muzzle Brake, compensator, and flash hider to provide maximum recoil control by effectively eliminating muzzle climb.
Three long flash hiding apertures allow diminishing muzzle flash ensuring the shooter an unrestrained view through optics or sights.

What I liked:
  • Performs soft, low-energy recoil;
  • Due to the porting design, the optimal pressures of 9mm is reached;
  • Easily capable to change the timing;
  • Provides fast, accurate follow-up shots.
What I didn’t like:
  • None yet.

#14 Yankee Hill Machine Phantom 5.56 Aggressive AR 15 Compensator

Yankee Hill Machine Phantom 5.56 Aggressive AR 15 Compensator

Specification

Caliber: 5.56x45mm NATO
Threads per Inch: 1/2×28
Length: 2.25 in

Yankee Hill developed two-in-one devices – Compensator and Muzzle Brake (it’s not a flash hider) with Phantom (5.56mm) styling and aggressive front end. The tactical Ar-15 muzzle device features construction with five apertures and bottom part without holes that exclude dust clouds, directed to the shooter’s face while shooting in the prone position.

What I liked:
  • Aggressive Front End;
  • Comes with the crush washer;
  • No issues with dust, as there are no downward facing ports: appropriate for the prone position shooting;
  • Affordable price;
  • Easy to install;
  • Looks stylish;
  • Good fit and finish.
What I didn’t like:
  • None yet.

#15 Manticore Arms Afterburner Linear AR 15 Compensator

Manticore Arms Afterburner Linear AR 15 Compensator

Specification

Caliber: 5.56x45mm NATO
Threads per Inch: 1/2×28
Length: 2.25 in
Weight: 3.4 oz
Diameter: 1 in

The Afterburner comp is constructed with a 1.8-inch-long internal chamber and inner threading for both purposes: redirecting gas flow to decrease flash and delivering a threaded surface to attach additional threaded muzzle units (flash hider or compensator tips) for extra effect. These comps are crafted from steel (8620) with heat-treated Rockwell 50C and Black Oxide Finish. The Manticore compensator is marked “MA”, being produced in the specialized factories and 922r compliant parts. The Afterburner muzzle device fits inside the Manticore Arms Transformer Forend for AR-15.

What I liked:
  • Made in the USA;
  • 922r compliance;
  • Simple mounting due to the included crush washer and wrench flats.
What I didn’t like:
  • Not rated yet.

#16 Ultradyne Lithium PCC AR 15 Compensator Muzzle Brake

Ultradyne Lithium PCC AR 15 Compensator Muzzle Brake

Specification

Threads per Inch: 1/2×28
Caliber: 9mm Luger
Outer Diameter: 1.124 in
Weight: 4 oz

The Ultradyne engineered the muzzle device in such a way the vented gases do not block the sight path or move back to the shooter’s direction. These compensators are manufactured from Stainless Steel (416) with Ultra Rugged Salt Bath Nitride Coating to provide durable service.

What I liked:
  • Radically mitigates muzzle rise;
  • Comes with a timing nut to simplify the mounting;
  • Compatible with the Dynamount Sighting System;
  • Aggressive Comp Ports;
  • No gases in the shooter’s sightline;
  • Quick follow-up shots;
  • Great design and overall performance.
What I didn’t like:
  • None yet.

#17 Guntec Usa Ar9 Micro AR 15 Compensator

Guntec Usa Ar9 Micro AR 15 Compensator

Specification

Caliber: 9mm Luger
Threads per Inch: 1/2 X 36
Weight: 2 Oz
Length: 1.5 in
Outside Diameter: 0.875 in

Multi-Port Micro Compensator for AR-9 is designed with three porting holes on the top to decrease the muzzle climb and one square aperture on each side to diminish pressure during prompt shooting.

What I liked:
  • Efficient at decreasing muzzle rise;
  • Compact size;
  • All Steel Construction;
  • Looks nice.
What I didn’t like:
  • A crush washer is not included;
  • Does not fit the 1/2×28 thread.

#18 CMMG Inc A2 AR 15 Compensator

CMMG Inc A2 AR 15 Compensator

Specification

Caliber: 9mm Luger; 5.56x45mm NATO
Threads per Inch: 1/2×36; 1/2×28

The CMMG crafted compensators from steel with a Black finish. This muzzle device construction delivers the rifle with minimized recoil and muzzle rise elimination, allowing quick follow-up shots.

What I liked:
  • Mitigates recoil, ensuring stable rifle management;
  • Cheap;
  • Dependable components;
  • Easy installation;
  • Lifetime Quality Guarantee;
  • Due finish;
  • Not covered by machining marks like other cheap devices on the market.
What I didn’t like:
  • None yet.

#19 JP Enterprises Barrel Tactical AR 15 Compensator

JP Enterprises Barrel Tactical AR 15 Compensator

Specification

Caliber: 9mm Luger; 5.56x45mm NATO
Threads per Inch: 1/2×36; 1/2×28
Outer Diameter: 0.85 in
Exit: .406; .281

JP Enterprises offers two models of the Barrel Tactical Compensators for 9mm and 5.56mm calibers with different threading (1/2×36; 1/2×28) and exits (.406; .281) correspondingly in both Matte Black. These muzzle devices are designed with two porting slots on each side, placed opposite each other. The Compensator is crafted from steel and covered with Black Oxide.

What I liked:
  • Well built and sturdy;
  • Mitigates felt recoil and muzzle climb.
  • Construction is designed in detail.
What I didn’t like:
  • None yet.

#20 Strike Industries 223 King AR 15 Compensator

Strike Industries 223 King AR 15 Compensator

Specification

Caliber: 5.56x45mm NATO, .223 Remington
Threads per Inch: 1/2×28

The Strike Industries compensator is designed with a large dual chamber to provide mitigation of felt recoil and with the gas ports particularly angled to help diminish the side concussion. To ensure some flash suppression the four serrated prongs were engineered on the K-Comp. These Strike compensators are not just considered to be more surrounding friendly than a brake, they are quieter. At the same time this combo muzzle device performs great results as a brake – decrease recoil and muzzle rise significantly – even indoors without the pressure wave that can irritate the nearest shooters.

What I liked:
  • Value for money;
  • Considerable recoil absorption: cuts the recoil in half;
  • Includes a crush washer;
  • Efficient muzzle device combo;
  • Aesthetically pleasing: gives the AR15 a mean look;
  • Every time pulling the trigger, the shooter stays on target;
  • Immediately mounting with zero issues;
  • Even after 70 rounds through this compensator at indoor range, it doesn’t hurt the hearing;
  • Well made – excellent design;
  • No noticeable flash above the barrel looking through the un-magnified red dot.
What I didn’t like:
  • None yet.

How To instal an AR 15 Compensator

  • Before a AR 15 Compensator mounting or dismounting, unload the rifle; it must stay empty.
  • Follow the device manual to get proper orientation: the muzzle brake ports should be perpendicular to the rifle’s vertical axis.
  • A crush washer is a soft ring that operates as a seal between the device and barrel, installed without any tools, it’s necessary just to slip the washer on the barrel. It helps set the device timing easier, lining up it duly.
  • If the compensators come without crush washers, then use blue Loctite on the thread (two drops), after that back up to due orientation, lock a locking set screw on the bottom, and give two days to set up.
  • If your device type needs timing: tighten the muzzle brake with the hand tightly to the 10 o’clock (open-end wrenches can help), align the muzzle device with the barrel at 12 o’clock position (take the barrel face like a clock face). Then in short increments without over-tightening, turn the muzzle brake till getting the 12 o’clock position. Everything is ready.

Conclusion

Your shoulder will be safe if you use the rifle compensator. Due to the reduction of the recoil, you will get more rifle control while shooting and improve accuracy, quicken the follow-up shots, and sights realignment on the target. Just remember about loud firing sounds, so ear protection is necessary for healthy hearing every time while shooting. Yankee Hill Machine Phantom 5.56 Aggressive Compensator/Muzzle Brake YHM-28-5M1 is cheap but approved by many shooters for reliable performance.

Best Picks

  1. Walker Defense Research AR-15 NERO Hybrid Muzzle Brake & Compensator – Due to the innovative technologies a nickel-chromium superalloy and Inconel are used in the muzzle brake manufacture, improving its overall performance in recoil mitigation and providing good rifle control.
  2. Bravo GFC-MOD-0 BCM Gunfighter Compensator Mod 0 5.56mm – The reviewers denote the Mod 0 sufficiently reduces muzzle climb, not emitting a serious concussive blast, featuring smart design.

Budget Picks

Strike Industries presents two effective muzzle device combos:

  1. Strike Industries 223 King Compensator SI-KingComp-223/5.56
  2. Strike Industries Triple Crown 223/5.56 Compensator SI-TC-Comp-223/5.56

They both are great alternatives for a compensator-muzzle brake combination. The SI Triple Compensators are lightweight and outfitted with aggressive frontal crowned-edge, which can be used for self-defense as well.

Tags: ar 15 compensator, best ar 15 compensator, ar 15 linear compensator, linear compensator ar 15, ar 15 compensator review

#Best #AR 15 Compensator #Review #Linear #Flash Hider #Muzzle Brake #Supressor #Recoil

Tatiana Kursakova
Tatiana Kursakova
Professional shooter, traveller, survivalist
My love of guns is in my blood, since childhood I have spent hours enjoying the beauty of guns and adored going through their parts.

Tactical accessories are another passion of mine that I could write about endlessly - my house and garage are full of tactical gadgets, luckily my family shares my interests.

I'm infatuated with traveling that's why work at one place with a daily routine and standard schedule is not for me. I prefer copywriting and English tutoring as a freelancer. I live in a male family among constant talks about cars, guns, hunting, fishing, and, of course, dinosaurs 😊.

My husband is an obsessed hunter, and my two sons are fans of «Demolition Ranch» of YouTube blogger Matt Carriker. They are my best consultants about weapon and all-around ammunition topics. All together we share a love for adventures. Every camping or mounting hiking trip is a "small survival", giving irreplaceable experiences. Nothing can be better than the satisfaction of observing wild nature.

Motto: «Born in Ukraine, made is the USA».

Read more about our team of expert authors.

Leave a Reply

Close Menu

Pin It on Pinterest