If you take care of your health and want to be pleased with the shooting, it’s better not to skimp on your hearing, and buy a silencer.
The muffle devices are constructed to diminish the range and velocity of the projectile gasses, shooting up from the muzzle.
Why do you need a suppressor?
The suppressors can be used at the range, at hunting, while sportive shooting, or at paintball competitions to help the shooter be hidden for opposing players. These devices allow you to muffle the shot sound, protecting your ears. Depending on ammunition (a subsonic or usual rounds), barrel length, and environmental conditions, sound suppression can vary less than 3 dB.
Table of Contents
- Best Suppressor Review | Silencer Review Guide
- Best .30 Caliber Suppressor
- #1 TORRENT SUPPRESSORS MONEYSHOT X TITANIUM 30 CAL SUPPRESSOR
- #2 GRIFFIN ARMAMENT RECCE 7 (.30 CAL) SUPPRESSOR
- #3 GRIFFIN ARMAMENT 30SD-K (.30 CAL) QD SUPPRESSOR
- #4 TORRENT SUPPRESSORS T3 X TITANIUM 30 CAL SUPPRESSOR
- #5 GRIFFIN ARMAMENT PALADIN .30 CAL SUPPRESSOR
- #6 DEAD AIR NOMAD-L 30 CAL SUPPRESSOR
- #7 RUGGED SUPPRESSORS MICRO 30 .30 CAL SUPPRESSOR
- Best 45 ACP Suppressor | Best 45 Suppressor
- Best 308 Suppressor
- Best 223 Suppressor
- Best Multi-Caliber Suppressor
- Best 450 Bushmaster Suppressor
- Best 338 Suppressor
- Hоw to Make a Gun Suppressor
- How to Attach a Suppressor To a Non-Threaded Barrel
- How to Clean a Suppressor
Best Suppressor Review | Silencer Review Guide
Best .30 Caliber Suppressor
#1 TORRENT SUPPRESSORS MONEYSHOT X TITANIUM 30 CAL SUPPRESSOR
TORRENT Suppressors are manufactured from 6Al-4V Titanium (Grade 5), covered with high-temperature Cerakote in Black color. These muffle devices are constructed for bolt action firearms with a rating 300Win 18″ bbl or longer. For 300BLK the sound reduction is 114.4 dB at ear (157.4dB without suppression), for .300Win 180grain the sound is reduced 129.3dB (158.3 decibels unsuppressed).
#2 GRIFFIN ARMAMENT RECCE 7 (.30 CAL) SUPPRESSOR
Griffin constructed an upgraded multi-caliber sound suppressor, the Recce 7 (MOD 3), with a patented baffle system and integrated low-profile flash reducer. All parts of the Recce 7 are crafted from 17-4ph Stainless Steel solid billets, heat-treated, covered with high-temperature Cerakote. This silencer can be attached to Taper Mount Direct Thread adapters or any Taper Mount full auto devices. There are sound attenuation rates, depending on the caliber: 32DB for 7.62mm, 33DB for 5.56mm, 34DB for Super 300BLK, and 39DB for Sub 300BLK.
#3 GRIFFIN ARMAMENT 30SD-K (.30 CAL) QD SUPPRESSOR
The Griffin developed a 30SD-K QD (quick detached) silencer for a shorter .30 caliber. To provide the 30SD-K with extra durability Griffin combined advanced CNC manufacturing, TIG fusion, wire EDM, filler rod welding, together with a high-temperature Cerakote finish. The Gate-Lok interface ensures one of the quickest mounting on the market, equipped with 5.56-mm compensators, which fit the USGI A2 government contract compliant muzzle devices, a Griffin mount allows them to be installed flawlessly on other devices. Precision ground 30SD and M4SD mounts deliver insignificant, repeatable, and reliable point of impact (POI) shifts. These suppressors perform such subsonic sound signature: 127dB on 300BLK, 136dB on 5.56mm, and 138dB on .308. The 30SD-K comes with a flawless bore, silencer pouch, and shim set.
#4 TORRENT SUPPRESSORS T3 X TITANIUM 30 CAL SUPPRESSOR
The T3 X suppressor is made of 6Al-4V Titanium (Grade 5) with a high-temperature Cerakote finish in Black. This silencer operates with different calibers: 300BLK, .30CAL, .308, 7.62 NATO to 300 Win Mag. There are compatible mounts for Torrent suppressor: Q Plan-B, Hideout Muzzle Device & QD Mount Set, SilencerCo. ASR, Dead Air Key-MO, Industry Standard 1.375”-24 TPI. The sound reduction for 7.62 NATO is 134 dB and for 300BLK at ear is 116.4 dB (158.3 dB and 150.45 dB unsuppressed correspondingly). Torrent, taking care of the customers’ hearing, so recommends always to wear in- or over-the-ear protection.
#5 GRIFFIN ARMAMENT PALADIN .30 CAL SUPPRESSOR
The PALADIN silencer features welded construction, a CNC machined, billet tube body to deliver necessary thermal transfer and sturdiness. A 17-4 blast baffle decreases sparking, which is featured for titanium silencers. This full-auto muffle device is crafted of 17-4 Stainless Steel and 6AL4V Titanium combination, covered with QPQ finish. The PALADIN suppressors come with a Taper Mount Minimalist Brakes, 1/2×28 direct thread adapters, and disassembly tools with Griffin armorers’ wrench.
#6 DEAD AIR NOMAD-L 30 CAL SUPPRESSOR
DEAD AIR is good at manufacturing high-performance silencers Nomad-L for high-pressure cartridges, as well as lower pressure ones. These suppressors, from stainless steel (17-4) and titanium (Grade 5) with Cerakote body, are outfitted with 5/8-24 direct-thread attachment for 5.45X39mm; for 7.62X39mm and 7.62X54R should be a concentric barrel. There are no restrictions for barrel length.
#7 RUGGED SUPPRESSORS MICRO 30 .30 CAL SUPPRESSOR
RUGGED offers two configurations: Short (K), when length and weight of suppressor are critical, and Standart (Full), which is easily transformed from the short version and provides great sound reduction. The Micro30 tube and mount are machined from 17-4 Stainless Steel bar stock and heat-treated, with full circumference welded Stellite baffles, covered with high-temp Cerakote. This silencer comes with a 7.62 R3 Flash Hider (5/8×24 Thread Pitch), End Cap Tool, 7.62 Removable Front Cap, and Micro30 Logo Sticker. Sound Levels (at ear) vary depending on caliber and configuration: for 300BLK in Full is 122.6 dB/in K – 132.7 dB; for 5.56mm in Full is 131 dB/in K – 135.7 dB; for .308 in Full is 135.7dB /in K -138.7dB.
Best 45 ACP Suppressor | Best 45 Suppressor
#1 GSL TECHNOLOGY .45 ACP PYTHON SUPPRESSOR
The GSL outfitted the suppressors with a .578-28 mount and direct thread piston, designed for .45 ACP (caliber) mounts. If you need other optional mounts, they are available and can be purchased separately. The Python silencer with interchangeable piston core is manufactured from Aluminum, coated with hard anodized. The notified sound attenuation is 30 dB.
#2 TORRENT SUPPRESSORS ORTHRUS 45 SUPPRESSOR SYSTEM
The Orthrus .45 caliber is a Rainier Arms Exclusive, rated up to .300 win mag. This modular X series suppressor features four different general lengths due to the removing baffle segments. Fused baffles make the silencer lightweight, but durable. The muffle device is covered with high-temperature Cerakote in Graphite Black color. The suppressor is outfitted with the 0.6-oz end cap, and one booster, which size can be selected: 1/2×28, .578×28, M16.1LH”, or M13.5x1LH.
Best 308 Suppressor
#1 STEALTH PROJECT RECON .308 SUPPRESSOR – ALUMINUM
The silencer core is manufactured from 7075 Aluminum, the external tube from 6061 Aluminum, finished with black Hardcoat Anodize. The Recon zero muzzle flash suppressor, without baffle strikes, is outfitted with a single continuous attenuation chamber. The patented canted helical design ensures the flawless operation of the multi-caliber silencer. The Accelerated Gas Technology allows suppressors to work quieter and be easier in cleaning. Point of impact shift is diminished from unsuppressed to suppressed firing. This suppressor, with direct thread 5/8-24, is shorter in length and larger in volume, delivers a sound of 133-136 dB.
#2 ODIN WORKS BADLANDS 308 QD SUPPRESSOR
The ODIN declares to do the best to develop the smartest suppressors on the market. The Badlands 1.5-inch diameter suppressor is crafted of a durable combination of titanium and stainless steel (17-4). The ODIN designed a special sounding can: having priority, to satisfy the shooters and bystanders, suppressing the noise that influences their ears, not only to pass the sound meter tests.
#3 STEALTH PROJECT RECON QD .308 TITANIUM SUPPRESSOR
The RECON QD silencer, without baffle strikes, is equipped with a single continuous reduction chamber. Due to the larger surface area (about 30-50% more than common constructions), the silencer features the quickest heat dissipation rate per volume, providing more rounds downrange for less time. The patented canted helical design delivers the proper work of multi-caliber muffle devices. The suppressor core is made from Alloy ETD 150 Steel, the outer tube from Titanium (Grade 9). The Accelerated Gas Technology allows suppressors to be cleaned easier and work quieter. Concerning adapters: QD Coupler is compatible with Stealth Project taper mount muzzle units and Dead Air Armament Key-mo, Plan-B, SilencerCo ASR, and other 1.375x24TPI adapters. This silencer delivers a sound of 132-134 dB for Rifles.
#4 STEALTH PROJECT RECON-TI .308 SUPPRESSOR
The Recon-TI zero muzzle flash suppressor without baffle strikes features a single continuous attenuation chamber and patented canted helical design which ensures flawless device operation. The Accelerated Gas Technology allows multi-caliber silencers to work quieter and be easier cleaned. The Recon-TI core is manufactured from Alloy ETD 150 Steel, the external tube from Titanium (Grade 9). The RECON-Ti, with direct thread 5/8-24, is full-auto rated to work at any conditions. The caliber inserts are available for 6.5 mm, .308, and .22 calibers to improve the sound attenuation (133-136 dB).
Best 223 Suppressor
#1 STEALTH PROJECT STEALTH-TI 223 SUPPRESSOR
The STEALTH-TI suppressor is designed with a single continuous attenuation chamber. The patented canted helical construction ensures the due operation of multi-caliber muffle devices without baffle strikes. The Accelerated Gas Technology allows suppressors to be cleaned easier and to function quieter. The Zero Muzzle Flash silencer has the fastest heat dissipation rate per volume due to the enlarged surface area (about 30-50% more than other usual devices), delivering more rounds downrange for less time. The suppressor core is made from Alloy ETD 150 Steel, the outer tube from Titanium (Grade 9), covered with black Cerakote. The tough direct thread (1/2-28) mounting is suitable for Full Automatic (not longer barrel than 10.5″) and SBR versions. The caliber inserts exist for .22 and .17 calibers to enhance the sound attenuation (132-134 dB).
#2 NG2 DEFENSE MAXFLO 3D SUPPRESSOR – .223
NEXGEN2 Defense (NG2) developed new technologies for MAXFLO 3D suppressors Advanced Flow Dynamics (AFD) and Zero Back-Pressure Suppression, minimizing the issues with the first round “pop” and flash, back-pressure, recoil, accuracy losing turbulence, buildup overheating, and others. These silencers with 1/2×28 thread pitch are crafted from Stainless Steel and Titanium to provide durability.
Best Multi-Caliber Suppressor
#1 GRIFFIN ARMAMENT OPTIMUS MODULAR SUPPRESSOR
The Optimus is a high-performance and versatile silencer, suitable for rimfire calibers up to 300 Winchester magnum. This suppressor can be transformed into a 9-mm pistol silencer and can fire in short length. A 7.9-inch (16 oz, 308 rated) middle-size taper mount is configured due to the optional minimalist brake shield. The additional low-profile three-lug unit can be securely attached for 556, 9mm, and 300 blk out carbines. The suppressors come with full booster assembly; Taper-Lok baffle; pusher rod; piston (1/2×28); full-size taper mount; 30-caliber Minimalist Brake Mount (5/8×24); 9mm and 22 caliber end caps (which can replace the host end caps to make the rimfire shooting quieter); and hex and car stock multi-tools. Suppression with Full Size configuration: 20″ 308 = 137DB; 14.5″ 5.56mm = 134DB; 12″ 300BLK =126DB. Suppression with Short configuration: 12″ 300BLK= 137DB; 9mm Glock 17= 132DB; .22lr pistol =123DB; .22lr rifle = 117DB.
#2 GSL TECHNOLOGY MULTI CAL SUPPRESSOR
The Complete Multi Cal suppressor attenuates shots from .22 caliber to 300 WIN MAG. The GSL implemented 3D audio technology to demonstrate the great sound attenuation of 32 decibels on a .300 Blackout rifle. This silencer with multiple mounts is manufactured from Titanium and Inconel, covered with high-temperature Cerakote. Multi-Caliber Suppressor comes with direct thread attachments with 2 thread inserts (1/2 – 28 and 5/8 – 24), Bi-Lock Mount Flash Hiders for 5.56mm and 7.62NATO, and tools for assembly, disassembly.
Best 450 Bushmaster Suppressor
#1 GSL TECHNOLOGY GT-450 BUSHMASTER SUPPRESSOR
The GSL Suppressor is crafted of titanium with high-temp Cerakote in Black color. The GT-450 silencer is outfitted with the patented retention system, which prevents it from backing off while shooting. These muffle devices should be mounted with thread patented retainer (11/16 – 24) on .450 Bushmaster Rifles. The GSL declares the suppression of 27-dB.
Best 338 Suppressor
The EXR suppressor core is manufactured from 7075 Aluminum, the outer tube from 6061 Aluminum, covered with black Hardcoat Anodize. The patented canted helical construction provides the proper operation of multi-caliber muffle devices. The Zero Muzzle Flash silencer has the fastest heat dissipation rate per volume due to the enlarged surface area. The direct thread (3/4-24) mounting is suitable for 16″ Std. and 24″ Magnum. This suppressor sound attenuation is 138 dB.
Hоw to Make a Gun Suppressor
Hardly amateur suppressors can exceed manufactured and tested one. But if you do want to try to make this device at home, read the brief step-by-step guide below. Before proceeding, check whether a home-made silencer is not against your state’s regulations. Remember, such suppressors are obliged to be registered otherwise they are illegal.
- Measure the entire distance across the firearm barrel and its outer diameter.
- You’ll need 2 PVC pipe pieces: 1-inch diameter is 12-inch long (will be a suppressor barrel), and 2-inch diameter is 10-inch long.
- Draw dots on the straight line with 1⁄4-inch space between them on the suppressor barrel tube, turning it 90 degrees, do the same.
- Drill the throughout-pipe holes with a 3⁄16-inch drill-bit and sand the pipe inside and outside.
- Cut two end caps (use the outer diameter of 1-in pipe and inner one for 2-in tube) with a jigsaw or scroll saw from a thick wooden piece.
- Put this wooden cap between pipes, placing their edges flat, and glue it.
- Fill the between-tubes space with heating insulation (steel wool or mattress foam), and place and glue the second end cap.
- Fasten the longer 1-in pipe to the gun barrel with a hose clamp.
Before making a suppressor at home, evaluate, if it is worth these efforts and time. Perhaps, it is easier to purchase a ready silencer, which will be more reliable. Anyway, it’s up to you.
How to Attach a Suppressor To a Non-Threaded Barrel
There can be a threaded or a non-threaded barrel on the firearms for suppressors attachment, depending on the gun construction and brand. If you have no thread, follow the instruction to install the silencer successfully at home without a gunsmith.
- Clean the working surface, unload the gun.
- Disassemble the gun with tools (if needed watch online manual), take out the slider and spring parts, as you need a barrel, and fasten it into the gun vise to have access to the muzzle.
- To attach the silencer due to an adapter, tighten it around the barrel, screw it on, put some metal bonding agent to the muzzle outside, then secure the suppressor, twisting it until it tightens around the muzzle.
- You should wait for no less than 24 hours before shooting the firearm.
- Apart from adapters, you can use locking or taper pins, barrel bushing to secure the suppressors.
Now you know how to save your money: no need to buy a new threaded-barrel gun or to go to the gunsmith to do a thread on the barrel.
How to Clean a Suppressor
The pressure influences how clean the devices stay. Each firearm is chambered for special ammunition. Pistol calibers and .22LR are considered low-pressure ammo, which is about half less than common rifle cartridges. The high-pressure blasts out the old carbon, leaving a light new carbon coating with every shot, so no need to clean rifle suppressors. Cleaning is necessary for low-pressure ammo pistol silencers (every 750 rounds), as lead fouling and carbon build-up prevent the device from proper work, so the muffle devices lose inner volume and have lack room for the gasses to calm down inside the can. .22 suppressors become very dirty, need to be cleaned every 300-500 rounds.
- Do cleaning in gloves and a good ventilated room, use gun solvent, nylon brush for aluminum parts, wooden stick, or stiff plastic to scrape carbon buildup off without scratching the parts.
- Check the materials and finish in the manufacturer’s manual to be sure not to harm them and choose the correct solvent. Don’t soak uncoated aluminum with Simple Green.
- Unload the gun, disassemble the suppressor, fully disassemble all its parts. You can take photos of silencer internals in assembly to check yourself after reassembling.
- Remove the end caps and push out the baffles (it can take some effort).
- Clean all parts, especially threads, from carbon or lead deposits.
- Check O-rings, they may need replacement.
- Properly reassemble everything, following the instruction.
The silencers allow attenuating decibels (from 14 to 45 dB). The final quietness of silenced weapons while firing can vary, depending on suppressor brands, the barrel length, and used rounds (subsonic or usual ones). Choosing a quality silencer, you should remember about its maintenance to keep high performance. The muffle devices, chambered for low-pressure ammunition need to be cleaned after some quantity of shot rounds (about 750) or even more often.
Tags: #Best #Suppressor #Silencer # Review #.22 #9mm #Multi Caliber #308 #45 ACP #Blackout #AR 15 #AR 10 #Bushmaster #For The Money #22 lr #Glock #30 cal