• Reading time:19 mins read
  • Post category:Compensators / Glock
  • Post last modified:February 28, 2023
  • Post published:February 16, 2023

Table of Contents

Best Glock 23 Compensator

What is the Best Glock 23 Compensator? 🙂

Compensators are devices that are designed to help reduce recoil and muzzle rise in firearms, resulting in faster target acquisition and improved accuracy. In general, they are placed on the end of the barrel and use a combination of small holes and deflectors to redirect some of the hot expanding gases to counteract rearward pressure which otherwise causes recoil. The resulting counter-force applied by these jets reduces felt recoil, allowing the shooter to get back on target faster after each shot.

Benefits 🔥

  • 🔶 Reducing recoil can help you keep the gun on target, making it easier to make accurate follow-up shots.
  • 🔶 Muzzle flip, a compensator can help you get back on target faster after each shot, allowing for faster target acquisition.
  • 🔶 With less felt recoil, you may be able to maintain better control of the firearm, allowing for a more comfortable and effective shooting experience.
  • 🔶 The amount of force you need to absorb with each shot, a compensator can help reduce fatigue, allowing you to shoot for longer periods without discomfort.
Our Top Pick
Arms Republic Pistol Compensators
The compensator manufactured by Arms Republic features a unique design that incorporates a single top port. This design is highly efficient in reducing the amount of upward movement of the firearm's muzzle, thereby enabling the shooter to take faster and more precise follow-up shots.
Buy Now On OpticsPlanet
If you click this link and make a purchase, we earn a commission at no additional cost to you.

Features 😎

To help make the decision easier before buying, here are some of the features to consider when selecting the right one:

  • 🔷 First, look at the design. Many compensators feature a two-piece design, with an expanding gas venting system that reduces felt recoil and muzzle rise by directing gas away from the shooter. This type of design also allows for maximum port flexibility and customizability as they can be adjusted to match different ammo weights or shooting styles. Additionally, many designs feature machined ports on either side that allow for more efficient gas venting while reducing noise levels significantly.
  • 🔷 Second, consider what type of material is used in the construction. Most modern compensators are manufactured from lightweight aluminum alloy or stainless steel alloys that offer superior strength and durability while being lightweight enough for comfortable carry. These alloys are also treated with a corrosion-resistant coating to ensure longevity even with prolonged use in wet or humid conditions.
  • 🔷 Third, examine how adjustable is before making your purchase. Most compensators feature adjustable port sizes that can be adjusted using a provided hex wrench, allowing you to quickly change between different settings depending on your ammunition or shooting style. Some models offer adjustable clamp systems that allow you to securely attach it to your barrel without any additional tools required.
Our Top Pick
Custom Tactical Comp 1/2X28 Threaded
This product is designed to fit onto any standard threaded barrel with a measurement of 1/2x28. It is constructed using reinforced steel and is compatible with various models, including Gen3, Gen4, and Gen5. The installation process is made easy with the addition of wrench flats.
Buy Now On Amazon
If you click this link and make a purchase, we earn a commission at no additional cost to you.

Why is it Important to Reduce Recoil? 🤔

When shooting, recoil can be a major issue for many shooters. It, also known as a muzzle brake, can help reduce the felt recoil of the gun and make shooting it more comfortable and accurate. The use of this helps to alter the gas pressure behind the projectile as it is fired, thus reducing the amount of force sent back toward the shooter.

Not only does reducing recoil help shooters maintain better control of their firearm, but it also helps protect their hands and wrists from injury. Recoil can cause discomfort and even pain when firing weapons, especially if they are not properly held or braced. By using this item to reduce recoil, shooters can more comfortably fire larger caliber firearms without worrying about potential damage to their hands or wrists.

Reduced recoil means increased accuracy for follow-up shots because there is less movement in between each shot that needs to be managed by the shooter’s muscles. With less kickback from the gun requiring them to reset their aim after each shot, they can keep a steadier sight picture while still getting off multiple rounds quickly and accurately without difficulty. This makes follow-up shots much easier and faster with compensated weapons than with those without attached. 🤠

How To Choose Glock Compensator? ⚖️

Several factors should be considered:

🚩 The first factor to consider is the size. It’s important to make sure that the compensator you select will fit on your gun properly. Some models of Glock 23s may require specific sizes or shapes, so always check with your manufacturer before purchasing. Additionally, some pistols have specific mounting systems which may require specialized mounting hardware for proper installation.

🚩 The second factor to consider is weight. A heavier compensator will add extra mass to your pistol and can affect its balance and handling characteristics. If you plan to shoot competitively or with any regularity, it might be worth investing in a lighter setup if possible to maintain optimal performance across various conditions and situations.

🚩 The third factor is barrel length – if you plan on using a longer barrel with your Glock 23 then you’ll need to make sure that the compensator will fit onto it properly while still providing enough clearance between your hands and muzzle when firing. Additionally, some models of longer barrels may require additional clearance for the compensator ports to line up correctly when firing; this should always be verified before purchase.

🚩 Finally, material construction should also be taken into account when choosing; many models are made from high-grade aluminum for light weight and superior heat dissipation during rapid fire sessions, while others may be constructed from steel for greater durability in harsh environments or extended use without degrading performance over time. Each material has its own set of benefits depending upon how you intend on using your Glock – so always double-check that your chosen model is suitable for your application before making a purchase decision!

Best 🚀 Glock 23 Compensator Reviews

1# Arms Republic Pistol Compensators

Arms Republic Pistol Compensators

View on OpticsPlanet View on OpticsPlanet

Designed with professional shooters in mind, it effectively reduces muzzle rise and provides faster and more accurate follow-up shots. Manufactured from high-quality 6061 T6 aluminum, it is anodized for added durability and protection from the elements.

It has a 1/2×28 thread pitch and a lightweight design of only 0.25 oz for easy and comfortable handling. The single top port design maximizes its effectiveness in reducing muzzle rise, resulting in improved control during rapid-fire sequences.

Pros:
  • The unique design helps to reduce felt recoil and muzzle rise, providing improved control and accuracy.
  • Crafted from lightweight and durable materials, ensuring long-lasting performance.
  • Available in a variety of sizes and finishes to fit a wide range of pistols.
  • Easy to install without the need for any special tools or modifications.
  • Feature a unique and stylish design that enhances the look of your pistol.
  • Are suitable for a wide range of shooting scenarios, including target shooting, competition, and self-defense.
Cons:
  • May be more expensive than others on the market, making them less accessible to some consumers.
  • Require regular cleaning and maintenance to keep them functioning properly.
  • Increase the firearm’s sound, which could be an issue for some shooters.
  • In some states and jurisdictions, compensators may be restricted or illegal to use.

 

2# Custom Tactical Comp 1/2X28 Threaded

Custom Tactical Comp 1/2X28 Threaded

View on Amazon

The perfect experience for all standard threaded barrels. This expertly crafted piece of equipment has been designed with enforced steel for superior strength and durability and features wrench flats for easy installation.

It fits most Gen3 Gen4 and Gen5 models: 17, 19, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34, 35, 37, 38, and 39. You can confidently invest in this cost-effective upgrade knowing that it comes backed by a 10-year warranty. Enjoy an added level of precision control without sacrificing power or accuracy.

Pros:
  • Designed to reduce recoil by redirecting the gas and air pressure created by firing the firearm. This can help to improve the accuracy and control of the firearm, especially during rapid-fire situations.
  • Helps to minimize muzzle rise, which is the tendency of the firearm’s muzzle to lift upward during firing. This can help to improve the shooter’s sight picture, making it easier to aim and acquire targets.
  • Reducing recoil and minimizing muzzle rise, can help to increase the speed at which follow-up shots can be taken. This can be particularly beneficial for competitive shooters or in tactical situations where quick and accurate shooting is essential.
  • Available in a variety of shapes and sizes, allowing gun enthusiasts to customize their firearms for optimal performance.
  • Made from high-quality materials such as stainless steel, aluminum, or titanium, which ensures durability and resistance to wear and tear.
  • Easy to install and remove, allowing gun owners to quickly and easily customize their firearms for optimal performance.
Cons:
  • Can be louder than a firearm without a compensator. This can be a concern for individuals who are sensitive to loud noises or who may be shooting in areas where noise levels are restricted.
  • Improper installation can result in reduced performance or potential damage to the firearm. It is important to ensure that the comp is installed properly by a qualified gunsmith or individual with experience in firearm modifications.
  • Adds additional weight to the firearm, which can be a concern for individuals who are looking to minimize the weight of their firearm for mobility or other reasons.
  • Can affect the flash signature of the firearm, which can be a concern in low-light situations where visibility is important.

 

How To Install Glock Compensator? ⚙️

For starters, you should make sure that your pistol is unloaded and the magazine is removed from the handgun. Once that’s done, you need to remove the slide from the frame of your pistol before you can install the compensator.

There are two main types: thread-on and drop-in. If you have purchased a thread-on, then all you need to do is attach it to the muzzle of the barrel of your handgun by turning it in a clockwise direction with an appropriate wrench or pliers. This should secure it firmly in place and be ready for use.

On the other hand, if you have decided to purchase a drop-in, then this type of installation is significantly more involved as several steps need to be followed.

  • ✅ First, ensure that your handgun barrel has been properly lubed so that it won’t seize up when installed. When working with any firearm part, safety should always be your top priority so take care not to over-tighten anything during assembly as this could cause damage which would render the pistol unsafe for use.
  • ✅ Next, carefully line up the exhaust ports on both parts before inserting them together into position and securing them with an appropriate wrench or tooling set designed for such purposes. Make sure that any screws holding these components in place are tightened securely but not overly so as this could damage both parts as well as put undue strain on them and impair their ability to function correctly when fired.
  • ✅ Once everything has been assembled correctly and securely fastened into place, test fire several rounds into a safe backstop such as sandbags or other non-flammable material to ensure that everything is functioning properly before putting away or carrying your weapon elsewhere.

Following these steps will help ensure the safe installation of your compensator while providing optimal performance once installed correctly! 👍

FAQ 📚

🔻 Are compensators good on Glocks?
If you are looking for accuracy and stability when shooting, a compensator can be a great choice. It reduces felt recoil and muzzle flip, allowing shooters to better stay on target during rapid fire. This can help improve accuracy and overall performance when shooting.

They help keep your ammunition clean by reducing blowback from burning gunpowder into your chamber and action parts. This helps minimize damage over time due to dirty chambers and moving parts that don’t get cleaned often enough. Generally speaking, installing a compensator should improve the performance of your Glock in almost every way – accuracy, stability, and reliability should all increase with its use. 🔥

However, it also has its downsides: noise levels will be significantly louder than without one installed; plus, depending on the state you live in, compensators may not be legal to own or install due to local laws and regulations. It’s important to research these before buying or installing them so you understand what is allowed within your jurisdiction. Additionally, some models may require additional modifications to your gun such as drilling additional holes into the slide of the pistol – something that many people don’t want to do as it can void their warranty or compromise the reliability of their firearm over time.

🔻 Are compensators louder?
Muzzle blasts can be loud and even dangerous in enclosed spaces. Unfortunately, it isn’t a simple yes or no answer as there are several factors that affect how loud a compensator will be.

The first factor that affects noise levels is design. Some designs are quieter than others due to the material and shape of the suppressor. A solid aluminum construction will naturally muffle some of the sound created by gunfire more than one made from steel or plastic. Additionally, larger chambers tend to disperse air and gasses more effectively, resulting in a less intense muzzle blast.

The second factor is your ammunition choice. Heavier bullets typically create more noise because they require stronger gunpowder loads to propel them down range at higher velocities. If you want to achieve maximum suppression, then choosing lighter bullets will produce better results in terms of sound reduction and recoil control.

✔ Finally, the attachment method also plays a role in determining how loud your compensator will be when shooting. Most models come with either quick detach or threaded barrel attachments which serve different purposes and have their own advantages and disadvantages in terms of noise reduction capabilities. Quick detach models can allow you to quickly remove your compensator after shooting while threaded barrel models provide maximum stability and accuracy but can also amplify noise levels if not attached correctly.

🔻 Do compensators screw on?
Yes, they do screw on. It will typically include a set of screws that attach the compensator to the barrel of your gun and hold it securely in place.

The installation process can vary depending on the specific model you purchase, but most of them are relatively straightforward to install. Generally, you’ll need to unscrew the existing thread protector from your gun’s barrel and then use a set of Allen keys or wrenches to attach the compensator in its place. The screw may be located at either end of the compensator, so make sure you orient it properly before attaching it firmly. Additionally, many of them come with instructions that may include additional details about proper installation for their specific product.

🔻 Do compensators affect accuracy?
It can affect accuracy in two ways: reducing felt recoil and muzzle rise and diverting some of the escaping gases away from the bullet path. Reducing felt recoil and muzzle rise is beneficial for accuracy because it allows shooters to maintain their sight picture better while firing, resulting in more consistent shot placement. When gases are diverted away from the bullet’s path they can reduce any instability that may be caused by their presence, contributing to improved accuracy.

Compensators are also useful for improving accuracy by making follow-up shots faster and more accurate. By removing excess pressure that builds up during shooting, they help reduce muzzle climb which contributes to allowing shooters to keep their sights on the target quicker between shots.

❗ It’s important to note that even though compensators can help improve accuracy in some cases, they’re not a substitute for good shooting form or practice. In order for them to be effective at improving accuracy, shooters must still practice proper gun handling techniques such as keeping an appropriate grip on the gun and using proper trigger control.

🔻 What are the disadvantages of a muzzle brake?
✔ The first downside is noise intention. Muzzle brakes may actually increase the overall sound levels produced by a firearm, resulting in louder and more intense blasts than without the brake. This can be dangerous in areas where loud noises can startle people or damage hearing, so it’s important to consider your environment when using it.

✔ The second disadvantage is increased blast pressure. With a muzzle brake attached, the concussive force created upon discharge is greater than without one, leading to more powerful shock waves that travel out from the muzzle area. This means anyone standing close by may experience greater injury from the resulting blast pressure than if there was no present.

✔ Finally, it can create quite a bit of dust and dirt when used on sand-like substrates, like gravel or soil. This debris can easily become airborne and cause discomfort to those nearby due to particles entering the eyes and noses. ❗ It’s also important to note that this dirt will accumulate quickly on the brake itself, leading to an eventual need for cleaning and maintenance on the device if it’s going to remain effective for prolonged periods of time.

🔻 What ammo to use with the compensator?
Choosing the right kind of ammunition to use with a compensator is a critical decision that must be made carefully. Generally speaking, it’s best to use full-metal jacket (FMJ) ammo when shooting with it. This type of ammo is preferred because it creates enough back pressure to help keep the muzzle steady and reduce recoil. It also helps prevent wear and tear on the compensator itself since FMJ rounds are usually less likely to cause damage than other types. 👍

However, using FMJ ammo exclusively may not always be practical depending on the application. For self-defense scenarios, hollow point (HP) ammunition may be preferable due to its superior stopping power compared to FMJ rounds. HP rounds create much less back pressure than FMJ rounds as they expand upon impact, so they don’t provide enough force to effectively stabilize the muzzle when used with a compensator. Precision shooters may find that match grade or other high-end hunting rounds offer improved accuracy over standard factory ammo, though these come with higher price tags and aren’t ideal for general target practice or plinking sessions due to their cost.

Conclusion 😀

Finding the best compensator can be a daunting task. But with this buyer’s guide, you have all of the information and product reviews that you need to make an informed decision. We hope that our advice has helped you narrow down your choices and find the perfect item for your needs. Whether it’s reducing recoil or adding weight, a good quality product will take your shooting experience to new heights! Thanks for reading! ✌️😎

Affiliate Disclosure: Rotorm.com sometimes gets paid for listings, through sponsors or affiliate programs like Amazon, Optics Planet, Lucky Gunner, Brownells, Cabelas, Rainier Arms, 5.11 Tactical, Bass Pro Shop, etс. Clicking a link helps keep Rotorm.com free, at no extra cost to you!

About the author: Each article on our site is written by experts in survival and tactical equipment, gun enthusiasts, extreme travelers, military, law enforcement and desperate professionals, read about the author at the bottom of the article or visit "About Us" page.

Note: The views and opinions expressed in this article are those of the authors and do not necessarily reflect the official policy or position of any agency.

0 0 votes
Article Rating
Subscribe
Notify of
guest
11 Comments
Newest
Oldest Most Voted
Inline Feedbacks
View all comments
JeremyUS
JeremyUS
1 month ago

Is the Custom Tactical Comp 1/2X28 Threaded easy to install?

    Mike78
    Mike78
    1 month ago

    Compared to shooting without a compensator, the difference is night and day. It has improved my accuracy significantly, while also reducing the kickback of each shot.

    I’m really impressed with how well it works, and would definitely recommend it to anyone looking to take their shooting skills to the next level.

      Eminja
      Eminja
      1 month ago

      I had been shooting my Glock 23 for several years and was confident that I knew the basics. But there was still something missing. I wanted to get more accuracy and efficiency out of my gun, but no matter what sights, grips, or other accessories I tried, they didn’t make enough difference. Would a compensator help me? Because the reviews are very inconsistent.

        WorchesterMan
        WorchesterMan
        1 month ago

        I’m so excited to try out one of these compensators and see just how much it helps my setup!=)

          NYfather
          NYfather
          1 month ago

          It’s great to have such detailed information in one place 👍

            Crowley43
            Crowley43
            1 month ago

            Are there any legal considerations for using a compensator on a Glock 23, such as restrictions on their use in certain states or municipalities?

              Jason Spakrs
              Jason Spakrs
              1 month ago

              Are the compensators compatible with other Glock models or only with the Glock 23? 🤔