• Reading time:41 mins read
  • Post category:Compensators / Glock
  • Post last modified:October 2, 2023
  • Post published:October 26, 2022

Best Glock 17 Compensator

What is a compensator for Glock 17? 🧐

It is a firearm accessory designed to reduce the recoil of the pistol during firing. This device is typically attached to the barrel of the Glock 17 and redirects some of the gases generated by the firing of the round to help counteract the upward recoil force. This results in reduced muzzle rise and allows the shooter to maintain better control over the firearm.

Compensator for Glock 17

Features 📚

A compensator for a Glock 17, or any other firearm, can come in various designs and configurations, but here are some common features and characteristics you might find:

✳️ Material: Compensators are often made from durable materials like aluminum or steel to withstand the stress and heat generated during firing.

✳️ Threaded Barrel Compatibility: Many compensators are designed to attach to Glock 17 barrels with threaded muzzles. This requires the pistol to have a threaded barrel or an adapter.

✳️ Multiple Chambers/Ports: Compensators typically have multiple expansion chambers or ports that redirect gas upward and sometimes to the sides. The number and design of these ports can vary between different models, impacting the effectiveness of recoil reduction.

✳️ Easy Installation: Compensators are generally designed for easy installation, often requiring a simple screw-on attachment to the threaded barrel.

✳️ Effective Recoil Reduction: The primary function of a compensator is to reduce recoil and muzzle rise. Look for a compensator that is known for effectively mitigating these factors, which can improve accuracy and control.

Our Top Pick
Killer Innovations Velocity Glock 17/19 Gen 4 Barrel Compensator
One of the standout features of this compensator is its unique attachment system. Unlike traditional compensators, it can be installed and removed without the need for any tools when used in conjunction with the Velocity Mod 2 barrel. This makes the process of cleaning your Glock significantly more convenient. Its design is all about precision. It pushes back to the thread shoulder during installation, ensuring impeccable bore alignment. This level of accuracy means that the bullet travels down the center of the compensator with a consistent air gap all around it. This equilibrium eliminates any unwanted forces that could cause the bullet to veer off course. Ultimately, this translates into exceptional downrange accuracy.
Buy Now On OpticsPlanet
If you click this link and make a purchase, we earn a commission at no additional cost to you.

Benefits 💣

Adding a compensator to a Glock 17 can offer several benefits for shooters, depending on their specific needs and preferences. Here are some of the advantages:

💥 Reduced recoil results in less muzzle rise, meaning the pistol’s front end stays on target more effectively after each shot. This leads to faster target reacquisition and better accuracy.

💥 A compensator can contribute to improved accuracy by minimizing muzzle movement. This is particularly valuable in competitive shooting sports where precision is crucial.

💥 With less muzzle rise and recoil, shooters can fire follow-up shots more quickly and accurately. This can be essential in self-defense situations or when engaging multiple targets.

💥 Reduced recoil and improved control can boost a shooter’s confidence, leading to better performance on the range or in self-defense scenarios.

💥 Using a compensator during training can help shooters develop better recoil management and trigger control skills, which can translate to improved performance when shooting other firearms.

Benefits of compensator to a Glock 17

Should you use it? 🤔

Whether or not you should use a compensator on a pistol, including a Glock 17, depends on your specific needs, preferences, and the intended purpose of the firearm. Here are some factors to consider when deciding whether to use a compensator on a pistol:

➡️ Recoil Management: If you struggle with managing recoil or desire better control over your pistol during rapid-fire or follow-up shots, a compensator can be a valuable addition. It reduces muzzle rise and makes the pistol more manageable.
➡️ Shooting Sports: In competitive shooting disciplines such as USPSA (United States Practical Shooting Association) or IPSC (International Practical Shooting Confederation), where speed and accuracy are paramount, compensators are commonly used to gain a competitive edge.
➡️ Self-Defense: For self-defense purposes, the choice of a compensator is less clear-cut. While reduced recoil and muzzle rise can be beneficial, compensators can also make the pistol bulkier and more difficult to conceal. Additionally, the added noise and flash from redirected gases may be disorienting in close-quarters encounters.
➡️ Cost and Availability: Compensators can vary in price, and not all models are readily available for all pistol types. Consider your budget and the availability of compatible compensators.

😊 In summary, whether you should use a compensator on a pistol like the Glock 17 depends on your intended use, skill level, and comfort with the modifications. It’s essential to weigh the advantages and disadvantages, conduct thorough research, seek professional advice if needed, and consider how the addition of a compensator aligns with your specific shooting objectives and local laws.

Best Glock 17 Compensator

1# Agency Arms 417 Glock 17/19/34 Gen4 Compensator

Agency Arms 417 Glock 17/19/34 Gen4 Compensator

View on OpticsPlanet View on Brownells

The Agency Arms 417 Glock 17/19/34 Gen4 Compensator is a top-of-the-line compensator designed for select Glock Gen 4 models. It features a 2 chamber design with 2 vertical ports and 1 side port, making it one of the most effective compensators on the market. Additionally, it features a front sight hole that allows you to transfer your existing front sight from your slide to the compensator. It’s made of high-quality 7075 aluminum and is compatible with the G17, G19, and G34. Overall, it’s an excellent choice for anyone searching for a high-performance compensator that delivers exceptional results.

Video review

Pros:
  • The front sight hole allows you to transfer your existing front sight from your slide to the compensator
  • Made of high-quality 7075 aluminium
  • Compatible with G17, G19, and G34
Cons:
  • It may require tuning of the recoil system

 

2# Agency Arms 417 Dual Port Barrel Compensators

Agency Arms 417 Dual Port Barrel Compensators

View on OpticsPlanet

The Agency Arms 417 Dual Port Barrel Compensator is a must-have for anyone looking to improve their Glock’s performance. As a result of our tests, we determined that this compensator is designed for select Glock Gen 5 models and features a 2-chamber design with vertical ports on the front and side. It also has a front sight hole, so you can transfer your existing front sight from your slide to the compensator. The 417 is compatible with the G17, G19, G19X, G34, and G45.

Pros:
  • Reduces muzzle flip
  • Improves accuracy
  • Reduces noise and flash
Cons:
  • They can be difficult to install

 

3# ZEV Technologies Pro Glock V2 Compensator

ZEV Technologies PRO Glock V2 Compensator

View on OpticsPlanet View on Brownells

The ZEV Technologies Pro Glock V2 Compensator is a must-have for anyone who wants to take their shooting to the next level. This compensator reduces muzzle rise and felt recoil, giving you more control over your shots. The contoured porting and enlarged guide rod channel also help improve accuracy, making this an ideal choice for competition shooters or anyone who wants to up their game. The mounting system is easy to use and allows you to install or remove the compensator without needing any thread-locking compound. Whether you’re using it on a G19 or any other 9mm Glock model, this compensator is sure to give you an edge. So don’t settle for anything less, get this compensator and take your shooting to new heights.

Pros:
  • Reduces muzzle rise and felt recoil
  • Contoured porting and enlarged guide rod channel improve accuracy
  • Easy-to-use mounting system
  • Compatible with G19 and other 9mm Glock models
Cons:
  • It is expensive
  • It makes the gun heavier

 

4# Trybe Defense Universal Double Port Full Size Compensator

TRYBE Defense Universal Double Port Full Size Compensator

View on OpticsPlanet

The Trybe Defense Universal Double Port Full Size Compensator is the perfect choice for anyone looking for maximum durability and resistance to wear and tear. It is heat-treated for maximum durability, and the surface Rockwell hardness is 25 HRc. Our findings show that the compensator also reduces muzzle rise and sensed recoil, making it an ideal choice for shooters who demand the best performance from their firearms. This universal compensator also fits all full-sized 9mm firearms, making it a versatile option for a variety of applications.

Pros:
  • Reduces muzzle rise
  • Reduces sensed recoil
  • Fits all full-sized 9mm firearms
  • Durable and resistant to wear and tear
Cons:
  • It may be too large for some firearms

 

5# Killer Innovations Velocity Glock 17/19 Gen 4 Barrel Compensator

Killer Innovations Velocity Glock 17/19 Gen 4 Barrel Compensator

View on OpticsPlanet

Searching for a compensator that breaks the mold? Notice the Killer Innovations Velocity Glock 17/19 Gen 4 Barrel Compensator. This unique compensator significantly reduces recoil and muzzle climb and attaches in a brand-new way that is completely different from any other compensator on the market. This revolutionary attachment system has a few advantages over traditional methods. First, it can be installed and removed without using tools when using our Velocity Mod 2 barrel. This makes cleaning your Glock a whole lot easier! Second, the compensator pushes back to the thread shoulder, so you know it’s attached correctly and securely. Third, the special design of the attachment system means that there is no need for set screws or welds, which could potentially damage your barrel. So if you need a top-quality compensator that offers innovative features and superior performance, choose this one. You won’t be disappointed!

Pros:
  • Reduces recoil and muzzle climb
  • Installs without tools
  • No need for set screws or welds
Cons:
  • The compensator is heavier than the standard barrel

 

6# Tyrant Designs T-Comp Glock Compensator

Tyrant Designs T-Comp Glock Compensator

View on OpticsPlanet

If you’re in the market for a compensator to fit your 1/2-28 threaded barrel Glock that will reduce muzzle rise and felt recoil, check out the Tyrant Designs T-Comp. It is a machined compensator that is compatible with Glock models 19, 34, and 43 and requires no modification to your firearm. Our research has shown that installation is quick and easy, using the supplied 16mm wrench, and once installed the T-Comp will fit most G34 holsters. The T-Comp also works with almost any grain ammunition. So don’t miss out on this great product, order your compensator today!

Video review

Pros:
  • Reduces muzzle rise and felt recoil
  • Compatible with Glock models 19, 34, and 43
  • No modification to the firearm is required for installation
  • Works with any grain ammunition
Cons:
  • It makes the gun significantly louder

 

7# Tyrant Designs Universal 9mm Compensator

Tyrant Designs Universal 9mm Compensator

View on OpticsPlanet

The Tyrant Designs CNC Universal fit 9mm Compensator, known as the Uni-Comp, has been designed to fit any 28-threaded 9mm barrel! Whether you own a Smith and Wesson, Glock, Sig Sauer, CZ, Walther, or ANY other 9mm firearm! It dramatically reduces muzzle rise and sensed recoil, allowing much quicker target re-acquisition. Compatible with 28 threaded barrels their compensator requires no modification to your 9mm firearm. The Uni-Comp works on almost any grain ammunition and maintains a very small profile to help aid against printing for concealed carriers. This compensator is the best way to reduce muzzle rise and felt recoil on your 9mm firearm! With its simple installation and universal fit, there is no reason not to try one out today!

Pros:
  • Dramatically reduces muzzle rise and sensed recoil
  • No modification necessary to the firearm
  • Works with almost any grain ammunition
  • Small profile aids against printing
Cons:
  • Installation can be a bit tricky

 

8# Primary Machine Glock Stealth Compensator

Primary Machine Glock Stealth Compensator

View on OpticsPlanet View on Brownells

The Primary Machine Glock Stealth Compensator is the perfect way to maximize the performance of your Glock pistol. This compensator is designed to fit any open-ended Glock holster, and features set screws that keep it securely in place. When we tried this product the anodized finish ensured durability, and the billet aluminum construction provided lasting reliability. The compensator also adds approximately 1.2-1.3″ to the overall length of the gun, making it more versatile for a variety of shooting applications.

Video review

Pros:
  • Maintains barrel orientation
  • Increases accuracy
  • Anodized finish for durability
  • Billet aluminium construction
Cons:
  • The compensator can be a bit noisy when fired

 

9# Strike Industries G5 Mass Driver Compensator

Strike Industries G5 Mass Driver Compensator

View on OpticsPlanet

Introducing the Strike Industries G5 Mass Driver Compensator – the perfect solution for those who want to reduce recoil without sacrificing performance. The G5 Mass Driver Compensator eliminates the need for a threaded barrel, making it 50-state legal, and its widened bore reduces baffle strikes and keyholing rounds. Additionally, its 2.5mm relief cut at the top rear of the comp prevents damage to the face of the slide, while its blended, no-snag profile ensures Compatibility with most open-bottom holsters. Finally, the compensator’s precision CNC machined construction and counter-recoil design make it the perfect choice for those looking to improve their shooting experience.

Video review

Pros:
  • Very affordable
  • Lightweight
  • Easy to install
  • Looks great
Cons:
  • Available only in one color

 

10# Dark Hour Defense Glock Stand-Off Device

Dark Hour Defense Glock Stand Off Device

View on OpticsPlanet

The Dark Hour Defense Glock Stand-Off Device is designed to give you the best possible accuracy and performance from your Glock pistol. It is made from high-quality materials and comes in a black finish. Using this product, our team found that the anodized finish gives it a durable, tough look that will stand up to the elements. The compensator and rail help to improve accuracy and make the gun more comfortable to shoot.

Video review

Pros:
  • The anodized finish is tough and durable
  • Compensator and rail improve accuracy
  • The gun is more comfortable to shoot
Cons:
  • Not always easy to use

 

11# Wasatch Arms Glock Compensator

Wasatch Arms Glock Compensator

View on OpticsPlanet

If you want to improve your Glock shooting skills, consider using the Wasatch Arms Glock Compensator. This bad boy is designed to decrease recoil by 60-80 percent, letting you shoot faster and more accurately. Through trial and error, we found that it also significantly reduces muzzle rise, making follow-up shots a breeze. Plus, it just looks darn good on your gun. Quick and easy to install, this compensator is a must-have for any serious shooter.

Pros:
  • Reduces recoil by 60-80%
  • Reduces muzzle rise
  • Easy installation
  • Looks good on your gun
Cons:
  • It can be expensive

 

12# Chaos Gear Supply Official Qube Compensator

Chaos Gear Supply Official Qube compensator

View on OpticsPlanet

The Official Qube compensator from Chaos Gear Supply is the first pistol compensator that doesn’t require set screws. It is made from durable 17-4 stainless steel, with 1/2×28 threads for compatibility with most barrels on the market. It’s just 1.25″ long and weighs only 2.4 ounces, so it won’t weigh your pistol down or throw off your balance when shooting. And because it’s brand new, you can be confident it will provide years of reliable, trouble-free performance. Don’t settle for the second best – get this compensator from Chaos Gear Supply and rest assured you’re getting one of the best pistol compensators on the market today.

Video review

Pros:
  • No set screws required
  • Mounts securely with a wrench
  • Made from durable 17-4 stainless steel
  • 1/2×28 threads for compatibility with most barrels
  • Lightweight and won’t throw off balance when shooting
Cons:
  • The compensator can be easily damaged
  • The compensator makes the gun louder

 

How to clean it? 🫧

Cleaning a compensator is an important part of firearm maintenance, as it can accumulate fouling, carbon buildup, and debris over time. Regular cleaning helps ensure the compensator functions properly and maintains its effectiveness. Here are the steps to clean a compensator:

🛑 Note: Always make sure the firearm is unloaded and the magazine is removed before starting any cleaning or maintenance.

🛠️ Materials Needed:

  • ✔️ Cleaning solvent or gun cleaning solution;
  • ✔️ Cleaning brush (nylon or brass);
  • ✔️ Cleaning patches or cleaning cloth;
  • ✔️ Bore brush;
  • ✔️ A toothbrush or small cleaning brush;
  • ✔️ Cleaning rod;
  • ✔️ Q-tips or cotton swabs;
  • ✔️ Safety glasses (recommended).

💡 Cleaning Steps:

💧 Disassembly: If necessary, disassemble the compensator from the firearm according to the manufacturer’s instructions. Some compensators may require removal for thorough cleaning.
💧 Initial Inspection: Examine the compensator for visible carbon buildup, fouling, and debris. Pay attention to the ports and chambers.
💧 Solvent Application: Apply gun cleaning solvent or solution to the fouled areas. Let it soak for a few minutes to help break down the carbon and fouling.
💧 Brushing: Use a cleaning brush (nylon or brass) to scrub the interior and exterior surfaces of the compensator. Pay special attention to the ports and expansion chambers. A toothbrush or small cleaning brush can be useful for detailed cleaning.
💧 Bore Brush: If the compensator has a bore or a pass-through hole for the barrel, use a bore brush to clean it thoroughly. Insert the brush from one end and scrub back and forth.
💧 Cleaning Rod: Attach a cleaning patch or cleaning cloth to a cleaning rod and insert it through the compensator’s bore or into the expansion chambers to remove loosened fouling and solvent.
💧 Cotton Swabs (Q-tips): Use Q-tips or cotton swabs to reach tight spots and corners that may be difficult to access with a brush or patch. Ensure that all fouling and carbon buildup are removed.
💧 Final Inspection: Inspect the compensator to ensure it’s clean and free from any residue or debris. If necessary, repeat the cleaning process until it’s completely clean.
💧 Reassembly: Reassemble the compensator onto the firearm if it was removed. Follow the manufacturer’s instructions for reassembly.
💧 Function Test: After reassembly, conduct a function test to ensure the compensator functions properly and the firearm cycles correctly.
💧 Lubrication: Depending on the manufacturer’s recommendations, apply a light coat of firearm lubricant or oil to the moving parts or surfaces of the compensator to prevent corrosion and maintain smooth operation.

📌 Remember that cleaning and maintenance procedures may vary depending on the specific compensator model and firearm you are using. Always refer to the manufacturer’s instructions for detailed cleaning guidance and safety precautions.

FAQ 🤠

What ammo is best for compensators?

🔍 The choice of ammunition for a pistol equipped with a compensator can impact the performance and effectiveness of the compensator. Generally, the best ammo for compensators depends on several factors, including the specific compensator design, the firearm, and your shooting goals. Here are some considerations:

  • 💥 Factory Ammo: Factory ammunition, particularly higher-quality ammunition from reputable manufacturers, can work well with compensators. These rounds are usually loaded to consistent specifications, which can lead to more predictable recoil and cycling.
  • 💥 Match-Grade Ammo: Match-grade ammunition is designed for accuracy and consistency. It is often chosen by competitive shooters because it delivers reliable performance and tight shot groups. Match-grade ammo can be a good choice when using a compensator for precision shooting.
  • 💥 Bullet Weight: The bullet weight in your ammunition can influence the performance of a compensator. Heavier bullets can generate more recoil, which the compensator can help mitigate. Lighter bullets may have less recoil but might not benefit as much from the compensator’s recoil-reduction features.
  • 💥 Muzzle Velocity: Ammunition with a consistent muzzle velocity can contribute to consistent performance with a compensator. Some compensators are tuned for specific loads, so it’s essential to test various ammunition types to find the one that works best with your specific setup.
  • 💥 Ammo Consistency: Regardless of the specific type of ammunition, consistency is key. Ammunition with consistent performance, including consistent powder charges, can help maintain predictable recoil and muzzle rise.
  • 💥 Recoil Impulse: Consider the recoil impulse of the ammunition. Some compensators work better with ammunition that has a sharper, more defined recoil impulse, while others may perform well with a softer recoil impulse.
  • 💥 Reliability: Ensure that the ammunition you choose is reliable and functions flawlessly in your firearm. Reliability is paramount, especially in self-defense or competitive shooting situations.
  • 💥 Testing: The best way to determine the ideal ammunition for your compensator is through testing. Try different loads, bullet weights, and brands to see which combination provides the best balance of reduced recoil, improved control, and accuracy with your specific compensator and firearm.

✒️ Remember that compensators can be tuned or designed for specific ammunition types, so it’s a good idea to consult the manufacturer’s recommendations or seek guidance from experienced shooters who have used the same compensator model. Additionally, always prioritize safety and ensure that the ammunition you choose is appropriate for your firearm and intended use.

Does it reduce velocity?

😉 Yes, a compensator can potentially reduce the velocity of a bullet fired from a firearm, although the extent of the reduction is typically minimal and may not be noticeable in most practical shooting situations. Here’s why a compensator can have a slight impact on bullet velocity:

  • Gas Redirected: A compensator is designed to redirect some of the high-pressure gases generated by the fired cartridge upward and sometimes to the sides. This redirection of gases is what helps reduce recoil and muzzle rise, improving control and accuracy. However, by redirecting some of the gases, the compensator also diverts a small portion of the propellant gases that contribute to bullet velocity.
  • Minimal Effect: The reduction in bullet velocity caused by a compensator is usually minimal and often negligible in real-world shooting scenarios. Most shooters do not notice a significant change in bullet velocity when using a compensator.
  • Balancing Act: Compensator designers carefully balance the trade-off between recoil reduction and any potential reduction in bullet velocity. The goal is to provide shooters with improved control and accuracy without compromising the overall performance of the firearm.
  • Ammunition Matters: The type of ammunition used can also influence the impact of a compensator on bullet velocity. Some ammunition loads may be more sensitive to changes in gas pressure and redirection, while others may be less affected.

🔥 In summary, while a compensator can have a minor effect on bullet velocity due to the redirection of gases, it is not a primary concern for most shooters. The benefits of improved recoil control, faster target reacquisition, and increased accuracy typically outweigh any minimal reduction in velocity. Shooters who prioritize maximum bullet velocity may choose not to use a compensator, but for those seeking better control and accuracy, compensators are a valuable accessory.

Are all compensators the same?

🤨 No, not all compensators are the same. Compensators for firearms come in a variety of designs, configurations, and functionalities, each with its specific features and intended purposes. Here are some ways in which compensators can differ:

  • 🔷 Design: Compensators can have different designs, including single-port, multi-port, hybrid, and more. The design determines how gases are redirected to mitigate recoil and muzzle rise.
  • 🔷 Attachment Method: They can attach to the firearm in various ways, such as threading onto the barrel, clamping onto the barrel, or using quick-detach mechanisms. The attachment method can affect ease of installation and removal.
  • 🔷 Materials: Compensators are made from materials like aluminum, steel, titanium, or polymer. The material choice affects durability, weight, and cost.
  • 🔷 Caliber Compatibility: Some models are designed for specific calibers or a range of calibers, while others are more versatile and can be used with multiple calibers.
  • 🔷 Barrel Compatibility: Compensators may require specific threaded barrels or other modifications for proper installation. Compatibility with the firearm’s barrel is important.
  • 🔷 Porting Configuration: The number, size, and placement of ports on a compensator can vary, affecting how gases are redirected and the extent of recoil reduction.
  • 🔷 Tuning: Compensators may be tuned for specific ammunition types or shooting styles. Tuned compensators are often designed to work optimally with particular loads.
  • 🔷 Aesthetics: They come in various shapes and finishes, allowing for customization and personalization of the firearm’s appearance.
  • 🔷 Purpose: Some comps are designed for competition shooting, where reducing recoil and muzzle rise is critical for fast and accurate shooting. Others may be designed for self-defense, where concealability and reliability are key considerations.
  • 🔷 Regulations: Compensators may be subject to legal regulations in certain jurisdictions. It’s essential to be aware of local laws regarding firearm modifications.
  • 🔷 Recoil Reduction: The effectiveness of recoil reduction can vary among compensators. Some may provide more significant reductions than others.
  • 🔷 Muzzle Blast and Noise: They can affect the level of muzzle blast and noise perceived by the shooter and bystanders. Some designs may increase muzzle blast and noise due to redirected gases.
  • 🔷 Brand and Model: Different manufacturers produce compensators with unique features and design philosophies. The choice of brand and model can influence performance and compatibility.

✍️ In conclusion, compensators are not all the same, and the right choice depends on your specific needs, shooting style, firearm, and preferences. It’s important to thoroughly research and consider your priorities when selecting a compensator for your firearm, as the right one can significantly enhance your shooting experience, while the wrong choice may lead to suboptimal results.

Do you need a threaded barrel for it?

🤓 In most cases, yes, you will need a threaded barrel to attach a compensator to a firearm. Threaded barrels have threads (or grooves) on the muzzle end that allow for the secure attachment of muzzle devices like compensators, suppressors, or muzzle brakes. The threads on the barrel and the compensator must match in size and pitch for proper attachment.

💡 Here are some key points to consider regarding threaded barrels and compensators:

  • 🔰 Compatibility: To attach a compensator, it’s crucial that the threading on the barrel matches the threading on the compensator. There is no universal standard for barrel threading, so it’s essential to ensure compatibility between your barrel and the compensator you intend to use.
  • 🔰 Barrel Replacement: If your firearm’s barrel is not already threaded, you may need to replace it with a threaded barrel to use a compensator. Many aftermarket barrels are available with threaded muzzles for this purpose.
  • 🔰 Barrel Length: Some compensators may add to the overall length of the firearm, which can be a consideration for concealed carry or other specific purposes. Be aware of how the compensator may affect the firearm’s dimensions and overall fit.
  • 🔰 Barrel Material: Ensure that the threaded portion of the barrel is made of durable material (typically steel) to handle the stress and heat generated during firing.
  • 🔰 Installation: Installing a threaded barrel or attaching a compensator typically requires the use of specialized tools or a gunsmith’s expertise to ensure proper alignment and torque.
  • 🔰 Local Laws: Be aware of local laws and regulations regarding the use of threaded barrels and compensators, as these may vary by jurisdiction.

❗ It’s important to check with the manufacturer of your firearm or consult a gunsmith to determine whether your firearm’s barrel is threaded or can be easily replaced with a threaded barrel. Additionally, when purchasing a compensator, make sure it is designed for the specific barrel threading and caliber of your firearm to ensure compatibility and safe operation.

Do I need to change the recoil spring with a compensator?

✍️ Whether or not you need to change the recoil spring when adding a compensator to your firearm can depend on several factors, including the design of the compensator, the ammunition you’re using, and your specific shooting goals. Here are some considerations:

  • ✴️ Compensator Design: Some compensators are designed to work effectively with the factory recoil spring, while others may benefit from a change in spring tension. Compensators that redirect a significant amount of gas to reduce recoil may require a different recoil spring to ensure proper cycling of the firearm.
  • ✴️ Ammunition: The type of ammunition you use can influence whether a change in the recoil spring is necessary. Heavier or hotter loads may require a stronger recoil spring to ensure reliable cycling, while lighter loads may function well with the factory spring.
  • ✴️ Shooting Style: If you plan to shoot a specific type of ammunition consistently or have a particular shooting style (e.g., rapid-fire or competition shooting), you may consider adjusting the recoil spring to optimize firearm performance.
  • ✴️ Manufacturer’s Recommendations: Some compensator manufacturers may provide recommendations for recoil spring replacements based on their compensator’s design and intended use. Always consult the manufacturer’s guidelines if available.
  • ✴️ Testing: The best way to determine whether a recoil spring change is necessary is through testing. After adding a compensator, observe how your firearm functions with your chosen ammunition. Pay attention to issues such as recoil impulse, slide cycling, and ejection patterns. If you experience problems like stovepipes, failure to feed, or erratic ejection, it may indicate that a different recoil spring is needed.

🌞 In summary, the decision to change the recoil spring when adding a compensator depends on various factors, and there is no one-size-fits-all answer. It’s essential to monitor the performance of your firearm after adding a compensator and make adjustments as needed to ensure reliable and safe operation. Keep in mind that proper function and reliability should always be a priority when modifying your firearm.

Conclusion 😉

Glock 17 compensators are a great accessory to have for your pistol. They help reduce recoil and muzzle flips, making it easier to shoot accurately. In this buyer’s guide, we’ve listed some of the best models available on the market. So whether you’re searching for a new one or just want to learn more about them, we hope this article helps you. Thanks for reading!😊❤️‍🔥

Affiliate Disclosure: Rotorm.com sometimes gets paid for listings, through sponsors or affiliate programs like Amazon, Optics Planet, Lucky Gunner, Brownells, Cabelas, Rainier Arms, 5.11 Tactical, Bass Pro Shop, etс. Clicking a link helps keep Rotorm.com free, at no extra cost to you!

About the author: Each article on our site is written by experts in survival and tactical equipment, gun enthusiasts, extreme travelers, military, law enforcement and desperate professionals, read about the author at the bottom of the article or visit "About Us" page.

Note: The views and opinions expressed in this article are those of the authors and do not necessarily reflect the official policy or position of any agency.

0 0 votes
Article Rating
Subscribe
Notify of
guest
10 Comments
Newest
Oldest Most Voted
Inline Feedbacks
View all comments
Peter Coleman
Peter Coleman
4 months ago

I adore my Glock 17; it fires like a dream. Recently, I stumbled upon the concept of compensators, and I’m fascinated by the idea of further improving recoil control. I’m curious if there are any downsides to getting a compensator, like the need to upgrade the spring. Has anyone out there had experience with this? If so, do you have any valuable tips to share?

    Flathead
    Flathead
    4 months ago
    Reply to  Peter Coleman

    I’ve come across some impressive compensators on the market, but I’ve heard that they can introduce reliability issues if your firearm isn’t properly tuned for them. I’ve heard that certain compensators may struggle with reliably feeding lighter rounds like 115gr unless you make some internal adjustments, such as swapping out the recoil spring. I’ve noticed that the Primary Machine Glock Stealth Compensator is often recommended as a top choice for effective compensators.

      Davis Griffin
      Davis Griffin
      4 months ago

      I’m currently in a bit of a dilemma regarding whether I should go for a Glock 17 or 34, and I’m trying to decide whether I should opt for a threaded barrel or not. Now, my question is why don’t I see compensators on Glock 17s or 34s as frequently? Is it because there’s not enough muzzle energy coming out of the barrel to make a noticeable difference in recoil reduction?

        Eddusk
        Eddusk
        4 months ago
        Reply to  Davis Griffin

        Muzzle energy isn’t a determining factor in how compensators function. Compensators operate by redirecting the gases that propel the bullet. The more gas expelled from the barrel, the more effectively a compensator works. However, it’s important to note that most compensators are optimized for use with 124gr projectiles or heavier. This ensures there’s enough recoil to cycle the slide even with the compensator’s gas redirection. Be prepared to adjust your return spring as well. If you’re willing to tinker with the setup, integrating a compensator into your Glock 17 setup will undoubtedly make shooting more enjoyable. I’d lean towards the Agency Arms 417 Glock 17/19/34 Gen4 Compensator for an extended sight radius.

          Cesar Richardson
          Cesar Richardson
          4 months ago
          Reply to  Davis Griffin

          I’ve been curious about giving the Agency Arms 417 Dual Port Barrel Compensators a try at some point, once I start feeling a bit more adventurous. Contrary to what some might think, I believe that a compensated Glock 17 isn’t as uncommon as it might seem. It’s a setup that many shooting enthusiasts appreciate and enjoy.

            Zeelgid
            Zeelgid
            4 months ago

            I’m in search of recommendations for a good compensator for my firearm. I’m also curious about compatibility – will any compensator fit my Glock barrel, or do I need a specific adapter for that? Additionally, I’m wondering if it’s possible to use real-steel compensators. Thanks in advance for any advice and guidance on this matter!

              Ilan Gonzales
              Ilan Gonzales
              4 months ago
              Reply to  Zeelgid

              I’ve come across a Trybe Defense Universal Double Port Full Size Compensator priced at around 45 bucks, and I must say they seem quite sturdy and reliable.

                Oatcutter
                Oatcutter
                4 months ago

                I’m curious to hear from fellow Glock users who are also using compensators and to learn about the specific purposes they have for their Glocks and the results they’ve achieved with compensators. Please feel free to share your experiences!

                  Norman Lee
                  Norman Lee
                  4 months ago
                  Reply to  Oatcutter

                  I’ve been using a Strike Industries G5 Mass Driver Compensator that doesn’t require a threaded barrel, and I’ve not encountered any reliability issues with it. It has proven unreliable during practice sessions. I’ve found that not all ammunition works equally well with compensators.

                    Beindrisz
                    Beindrisz
                    4 months ago
                    Reply to  Oatcutter

                    I’ve got a variety of compensators in my collection, including both full-size and micro comps. In my experience, the full-size compensators tend to perform exceptionally well, effectively reducing recoil and muzzle rise. However, the micro compensators are somewhat less impressive, performing just okay. One pleasant surprise has been the Tyrant Designs T-Comp Glock Compensator, which is an affordable option but works surprisingly well.