The gas-operated, assault Kalashnikov AK-47 is one of the widely-used rifles in the world: it fires 7.62 x 39 rounds, with an approximate recoil of 6.9 ft-lbs.
Among experienced shooters, it’s not considered too powerful recoil, but it’s necessary to get used to. Usually, it takes 20-30 shots to adapt to AKs and feel it on the shoulder. AK-type weapons are not as popular as American M16, because of less firing precision. If you prefer not only to check your arms’ strength but to get more pleasure from accurate shooting, you can try a muzzle brake.
Why do we need an AK muzzle brake 500 / AK 47 muzzle brake?
It is possible to enhance AK-firing accuracy peculiarities due to attaching a muzzle brake either a reliable scope or updating trigger. After attachment to the rifle barrel, the muzzle brake (called a recoil compensator as well) becomes its extension, diminishing felt recoil and muzzle rise, providing quicker sights realignment on the target, as a result, better accuracy. While firing the round and the gases are forced by the pressure of the burning powder out of the rifle muzzle. Recoil brakes allow to reducing recoil twice, preventing shoulder injuries.
AK Muzzle Brake Review | Best AK 47 Muzzle Brake
#1 Strike Industries JCOMP V2 Barrel AK Muzzle Brake
JCOMP-V2 compensators are appropriate for AK-47 and AR pistols, being good at competitions, small game hunting, or any range, where it is principal to keep the target in the sights. The Strike Industries offers a hybrid muzzle brake for significant reduction of muzzle flash and rise.
#2 Precision Armament M4-72 Severe-Duty AK Compensator
There are 5 available models, fitted for AK-47, AR-15, and AR-10 with Matte Black or Matte Stainless color. M4-72 Severe-Duty Compensator features compact and rigid closed-bottom construction with cutting-edge reverse venting triple baffle to minimize felt recoil (up to 75% reduction). The muzzle devices are crafted from precision-machined heat-treated stainless steel (HTSR 416 – SS bar, HRC 26-32). A proper fitment Accu-Washer muzzle alignment system is needed, which doesn’t come with the compensator.
#3 VG6 Precision Epsilon AK Muzzle Brake
The VG6 Precision manufactured a combination of a muzzle brake, compensator, and flash hider from heat-treated Stainless Steel (17-4ph) with a Black Nitride finish. The VG6 Epsilon AK features are almost similar to the Gamma muzzle brakes line. The main difference is in the port, located on the compensator bottom, where 6 valve holes allow the quickest propelled gasses, getting the second chamber, to come out. Such peculiarity delivers recoil with soft low energy, letting its complete management. The AK47 muzzle device includes an indexing pin slot for standard retention.
#4 SureFire 3-Prong Flash Hider with Suppressor Adapter
Patent-pending designed flash hider is outfitted with a rear labyrinth seal, which diminishes carbon buildup in the indexing system and makes suppressor removal easier after the long shooting. SureFire 3-Prong flash hider features multiple bearing surfaces, delivering superb suppressor alignment, preventing the audible tines ringing inside the suppressor. This device is manufactured from US mill-certified heat-treated precision-machined stainless steel bar stock with a matte black Ionbond DLC coating. Apart from AK47, there are compensator models, compatible with Heckler & Koch: G36 Compact, G36, HK417, MP7; M14, M16; Steyr AUG, Armalite AR-10, DPMS LR-308, Herstal: FN MK46, FN FAL; Knight Rifles SR-25; M240 Machine Gun; Browning.
#5 Spikes Tactical AK 7.62mm Dynacomp AK Muzzle Brake
The Spikes Tactical designed muzzle brake, featuring 360-degree brake slots covering. This muzzle device is crafted from heat-treated Stainless Steel (416), covered with Black Nitride. While mounting, the index notch allows for due timing. There are three models of Dynacomp muzzle brake, varying with weight and threads, compatible 7.62×39 or .308.
#6 SLR SR47 AK Muzzle Brake
SLR SR47 Muzzle Brake features a single-port design with a 1.2-inch overall short length and a sturdy small case. This AK Series muzzle device is manufactured from 4140 Steel with a melonite QPQ finish. While installation, dual indexing points allow easier timing. AK74 compatible construction is outfitted with a due port and bore size to ensure good performance.
#7 NcSTAR AK-47/74 Muzzle Brake
NcSTAR developed multi-chamber muzzle brakes, compatible with AKM, AK47, AK74 and 7.62X39, 5.56X45 (.223), 5.45X39 calibers, to minimize any muzzle rise. This device fits AK74, featuring M24mm X 1.5 RH barrels with detent, it comes with an internal thread adapter for AKM, AK47 threaded barrels (M14mm X 1 LH) with detent. The multiple chambers and ports on the top and sides are designed to direct expanding gasses upwards, diminishing muzzle climb, at the same time the bottom side is without slots to exclude dust signature that is important while shooting prone. The total weight (6.9 oz) includes an AKM/AK47 M14 X 1 thread adapter.
#8 SGM Tactical VEPR/AK-47 7.62/.308 Rifle Muzzle Brake
The SGM Tactical constructed a two-piece conical muzzle brake, which is effective for flash and smoke deflection to the sides. Stable muzzle control and recoil mitigation allow getting back on the target faster. The conical rifle muzzle brake is made of heat-treated steel, with a black oxide finish. To install this muzzle device, the barrel needs to be threaded (14×1). These SGM Tactical muzzle brakes developed specifically for AK-47 and Vepr rifle, suitable for 7.62×51 NATO (.308), 7.62×39, 7.62x54R calibers.
#9 DoubleStar Carlson Mini Comp AK Muzzle Brake
Carlson Mini Comp Muzzle Brake is designed with solid bottom 5 ports on the top, featuring the same characteristics as the AK47 slant brake. This short muzzle brake is similar in operation and design to the A2 Flash Hider compact version.
#10 Century Arms AK Muzzle Brake
The Century constructed muzzle brake with left-hand threaded (14×1), chambered for 7.62×39 caliber. This muzzle device is considered as one part according to sec. 922r compliance. This compensator is crafted from precision-machined steel with a nitride finish.
#11 VG6 Precision Episilon AK Muzzle Brake
VG6 Precision muzzle device is crafted from heat-treated Stainless Steel (17-4ph) with a bead-blasted Stainless-Steel finish. The compensator bottom features six valve ports, allowing the fastest gasses entering the second chamber, to come out. Such peculiarity lets full control of recoil with soft low energy. The AK47 muzzle device standard retention is provided with the indexing pin slot.
#12 DoubleStar Carlson Nitro Flash Enhancer for AK47 Muzzle Brake
The DoubleStar Carlson developed special convex ports to make the gas escape through them at once after shots, forming a large muzzle flash. The Nitro Flash Enhancer for AK47 rifles operates as a compensator too, successfully allots the extending gases. The DoubleStar Carlson promises movie-like shots with its muzzle brake attached to the Kalashnikov.
#13 SLR SR26 AK Muzzle Brake
SLR SR26 Muzzle Brake features a single-port design with a sturdy small housing. This AK Series muzzle device is crafted from heat-treated billet Steel (4140) with a melonite heat-treat finish. While installation, dual indexing points allow easier timing. AK74 compatible devices are equipped with the correct port and bore size to deliver good output.
How to Install a Muzzle Brake at AK 47
Before installing the muzzle device, it’s necessary to unload the firearm (it should stay empty). To mount a suppressor to the integrated muzzle device attachment, use properly sized shims. A crush washer makes the timing of the muzzle brake easier if you don’t attach a silencer directly to the muzzle brake. For the correct muzzle brake orientation, follow the instruction, as there can be different types of muzzle devices, their ports need to be perpendicular to the vertical axis of the rifle. Use a size crush washer or shim to line up the device properly. Perceive the barrel face like a clock face, the muzzle brake needs to be aligned with the barrel at 12 o’clock position. To reach proper timing: install the crush washer or shim and tighten the muzzle brake to 10 o’clock. Tighten down any muzzle device, till it lines with the 12 o’clock on the barrel, open-end wrenches will be suitable. It’s necessary to do it in short increments without over-tightening the muzzle device and not overpassing the 12 o’clock place.
Conclusion
Take into account that attached to the rifle a muzzle device is considered to be the barrel part and should be included in the total length (according to ATF regulations), so check the regulation of your state before installation.
Recoil compensators are constructed to redirect a portion of projectile gases to withstand recoil and prevent unwished muzzle climb.
Knowledgeable shooters declare that recoil can differ depending on position: while firing with a 520-grain bullet standing up it can be 45-70 recoil, not significantly felt, at the same time sitting, you can get a bruised shoulder, but it would be excluded with the muzzle brake. For comfy firing prone, choose the muzzle device without ports on the bottom to minimize the dust signature. Only one thing you still should keep in mind is ear protection (https://rotorm.com/best-ear-protection-for-shooting/).
Best Pick:
- Precision Armament M4-72 Severe-Duty Compensator. These Compensators feature compact and rigid closed-bottom construction with cutting-edge reverse venting triple baffle to minimize felt recoil (up to 75% reduction) and exclude dust signature and muzzle rise, withstanding high temperature in combat conditions.
Budget pick:
- Strike Industries JCOMP V2 Barrel Muzzle Brake. This hybrid two-chamber muzzle brake provides a significant reduction of muzzle flash and rise, allowing to keep the target in the sights and to get faster follow-up shots.
Tags: #Best #AK #AK 47 #Muzzle #Brake #AK 74 #Tapco #Review #Flash Hider #Lantac #Recoil #Reducing
Tactical accessories are another passion of mine that I could write about endlessly - my house and garage are full of tactical gadgets, luckily my family shares my interests.
I'm infatuated with traveling that's why work at one place with a daily routine and standard schedule is not for me. I prefer copywriting and English tutoring as a freelancer. I live in a male family among constant talks about cars, guns, hunting, fishing, and, of course, dinosaurs 😊.
My husband is an obsessed hunter, and my two sons are fans of «Demolition Ranch» of YouTube blogger Matt Carriker. They are my best consultants about weapon and all-around ammunition topics. All together we share a love for adventures. Every camping or mounting hiking trip is a "small survival", giving irreplaceable experiences. Nothing can be better than the satisfaction of observing wild nature.
Motto: «Born in Ukraine, made is the USA».
Read more about our team of expert authors.
Affiliate Disclosure: Rotorm.com sometimes gets paid for listings, through sponsors or affiliate programs like Amazon, Optics Planet, Lucky Gunner, Brownells, Cabelas, Rainier Arms, 5.11 Tactical, Bass Pro Shop, etс. Clicking a link helps keep Rotorm.com free, at no extra cost to you!
About the author: Each article on our site is written by experts in survival and tactical equipment, gun enthusiasts, extreme travelers, military, law enforcement and desperate professionals, read about the author at the bottom of the article or visit "About Us" page.
Note: The views and opinions expressed in this article are those of the authors and do not necessarily reflect the official policy or position of any agency.