FAQ – Questions & AnswersCategory: Revolver FAQHow to uncock a Taurus revolver?
Terrance asked 2 days ago
How do I remove the safety from a Taurus revolver?

5 Answers
Olson Staff answered 2 days ago

There are a few different ways to uncock a Taurus revolver, depending on the model. For most models, you can simply push down on the thumb release (located on the left side of the frame) and rotate the cylinder to align the hammer with an empty chamber. Once the hammer is in this position, it will be in what’s known as the “half-cock” position and will no longer be able to strike the firing pin.

How to uncock a Taurus revolver?

If your revolver has what’s called an “internal locking system,” however, you’ll need to first disengage the lock before proceeding as described above. To do this, locate the small lever or button on the frame that released the lock (typically located just above or below the thumb release) and disengage it. Once the lock is released, you should be able to proceed as normal.

Jordan Staff answered 2 days ago

If you’re asking how to uncock a Taurus revolver, then you probably already know that this type of gun is designed with a safety mechanism that allows the user to cock and uncock the weapon without pulling the trigger. Here’s a step-by-step guide on how to unlock a Taurus revolver:

1. Hold a revolver in your dominant hand with your pointer finger extended and placed outside of the trigger guard.

2. With your other hand, slowly and firmly pull back on the hammer until it locks into place.

3. To release the hammer, simply press the trigger. The revolver is now uncocked and safe to handle.

How to uncock a Taurus revolver?

Cruz Staff answered 2 days ago

If you have a Taurus revolver that is cocked, here’s how you can unlock it. first, make sure that the revolver is unloaded.

Then, point the revolver in a safe direction and hold it with one hand. With your other hand, push the cylinder release latch located on the left side of the frame above the trigger guard.

Then, rotate the cylinder clockwise until it lines up with the opening in the frame.

Finally, press down on the top of the hammer to release it and allow it to ride forward into its half-cock position.

How to uncock a Taurus revolver?

Antony Staff answered 2 days ago

There are a few different ways to uncock a Taurus revolver, depending on the model. For instance, in the Raging Bull series, you can simply push down on the hammer with your thumb. Alternatively, you can also use a small object like a pencil or paperclip to depress the trigger, which will release the hammer. In other models, there may be a small button or switch near the hammer that you need to depress to unlock. Consult your owner’s manual for more specific instructions.

How to uncock a Taurus revolver?

Ivan Staff answered 2 days ago

There are a few different ways to uncock a Taurus revolver, depending on the model. For example, on the Taurus Judge, you can simply pull the trigger to release the hammer.

On other models, such as the Taurus Raging Bull, you may need to first push down on the cylinder latch to release the cylinder before pulling the trigger. Consult your owner’s manual for specific instructions on your particular model.

How to uncock a Taurus revolver?