FAQ – Questions & AnswersCategory: Remington FAQHow to adjust Remington 700 xmark trigger?
Darr Hof asked 2 years ago
Can i adjust Remington 700 xmark trigger?

4 Answers
Olson Staff answered 2 years ago

If you’re a gun owner, there’s a good chance you’ve encountered a Remington 700. The Remington 700 is a popular rifle known for its accuracy and reliability. While the rifle is Generally considered to be reliable right out of the box, some gun owners prefer to adjust the trigger to their liking.

How to adjust Remington 700 xmark trigger?

There are several ways to adjust the trigger on a Remington 700. The first thing you’ll need to do is remove the body from the stock. Once the body is removed, you can access the trigger assembly by removing the magazine box and magazine follower. With the magazine box and follower removed, you should be able to see two screws that hold down the trigger guard. Remove these screws and carefully remove the trigger guard.

You’ll now have access to the trigger assembly. The first thing you’ll want to do is adjust the sear engagement. To do this, you’ll need to remove the safety lever and spring. With the safety lever and spring removed, you can rotate the sear adjustment screw clockwise or counterclockwise to increase or decrease sear engagement. Once you’ve found the desired setting, replace the safety lever and spring.

The next thing you’ll want to adjust is the trigger pull weight. To do this, you’ll need to remove the trigger return spring. With the trigger return spring removed, you can rotate the trigger adjustment screw clockwise or counterclockwise to increase or decrease trigger pull weight. Once you’ve found the desired setting, replace the trigger return spring.

You can also adjust the trigger travel if you’d like. To do this, you’ll need to remove the trigger return spring and disconnect the sear from the trigger. With the trigger return spring and sear disconnected, you can rotate the trigger adjustment screw clockwise or counterclockwise to increase or decrease trigger travel. Once you’ve found the desired setting, replace the trigger return spring and reconnect the sear.

Ivan Staff answered 2 years ago

If you own a Remington 700 rifle, you may want to adjust the trigger at some point. This is not a difficult process, but there are a few things you need to know before getting started.

First, it’s important to understand that there are two main types of triggers on a Remington 700 – the factory trigger and the aftermarket trigger. The factory trigger is generally suitable for most shooters, but if you’re looking for greater precision and performance, you may want to upgrade to an aftermarket unit.

There are many aftermarket triggers available for the Remington 700, so it’s important to do your research and choose one that will meet your needs. Once you’ve installed your new trigger, the next step is to adjust it to your desired settings.

How to adjust Remington 700 xmark trigger?

Here are a few tips for adjusting the trigger on your Remington 700:

  • Firstly, you’ll need to remove the bolt from the rifle. This will give you clear access to the trigger assembly.
  • Next, locate the adjustment screws on the trigger. These are usually located on the front and rear of the unit.
  • Once you’ve found the adjustment screws, use a small screwdriver to turn them until the trigger reaches your desired pull weight. For most shooters, a pull weight of 3-5 pounds is ideal.
  • Finally, reassemble the rifle and test the trigger by dry firing it a few times. Once you’re satisfied with the results, you’re ready to start shooting!

If you follow these steps, you should have no trouble adjusting the trigger on your Remington 700 rifle. Remember, take your time and be careful not to over-tighten the adjustment screws. With a little patience, you’ll be able to get your rifle’s trigger dialed-in perfectly.

Antony answered 2 years ago

There are a few different ways to adjust the trigger on a Remington 700. The first is to simply adjust the screw that controls the trigger pull weight. This screw is located just behind the trigger. Turning it clockwise will decrease the trigger pull weight while turning it counterclockwise will increase it.

Another way to adjust the trigger is by adjusting the sear engagement. This can be done by filing down the sear earn or stoning it with a sharpening stone. Be careful not to remove too much material, as this could make the trigger unsafe to use.

If you’re not comfortable making these adjustments yourself, you can always take your gun to a gunsmith and have them do it for you.

How to adjust Remington 700 xmark trigger?

Jordan Staff answered 2 years ago

First, you’ll need to disassemble the gun.

Next, locate the adjustment screws on the trigger assembly. With a small screwdriver, turn each screw until the trigger feels crisp and breaks at your desired weight. Be sure not to over-tighten the screws, as this can damage the trigger assembly.

Finally, reassemble your gun and test it out!

How to adjust Remington 700 xmark trigger?