Cecil Cook asked 2 years ago
How to lube BCG?

6 Answers
Olson Staff answered 2 years ago

The BCG (bolt carrier group) is the heart of your AR-15 rifle. The quality and care that goes into manufacturing this crucial component reflect the overall quality of your firearm. To keep your BCG operating at peak performance, it needs to be properly lubricated. Here’s a quick guide on how to oil your BCG.

How to oil BCG?

Before you start, make sure that you have the proper tools and supplies on hand. You’ll need a good quality gun oil, a cleaning brush, and some rags or other absorbent material. It’s also important to make sure that your work area is clean and well-organized so that you don’t accidentally contaminate your oil or gun parts.

1. Start by removing the charging handle from your AR-15. This will give you clear access to the BCG.

2. Using your cleaning brush, remove any dirt, debris, or old oil from the surface of the BCG. Be sure to pay attention to the bolt carrier key (the small hole in the top of the BCG) as this can be a common area for buildup.

3. Once the surface is clean, apply a thin layer of gun oil to all of the exposed metal parts. You don’t need to drench the BCG in oil, just a light coating will do.

4. Wipe away any excess oil with a clean rag. You don’t want there to be any pooling of oil inside the bolt carrier key as this can lead to problems down the line.

5. Replace the charging handle and you’re all set! Be sure to check your BCG regularly (at least once a month) and clean/oil it as needed.

Lewis Staff answered 2 years ago

You can oil your BCG (bolt carrier group) with any quality gun oil. It’s important to keep your BCG well-lubricated to ensure optimal performance and function.

Excessively lubricating your BCG can result in dirt and other particles becoming trapped inside, which can lead to increased wear and tear. Therefore, it’s important to find the right balance when lubricating your BCG.

If you’re using a quality gun oil, a few drops should be sufficient. Simply apply the oil to all moving parts of the BCG, including the bolt, bolt carrier, and firing pin. Then work the action of the gun several times to distribute the oil evenly. Wipe away any excess oil before using the gun.

It’s also important to clean your BCG regularly. You can use a variety of different cleaners, but a simple combination of soap and water should be sufficient. Simply scrub all parts of the BCG with a brush, being sure to get into all the nooks and crannies. Rinse the BCG well with clean water and dry it completely before lubricating and reassembling.

Keeping your BCG clean and well-lubricated is essential for optimal performance. By following these simple tips, you can ensure that your BCG will function properly for many years to come.

Ivan Staff answered 2 years ago

The most common way is to simply use CLP (clean, lubricate, protect) or another similar product. Spray the CLP onto a clean rag and then wipe down the BCG. You can also use a brush to get into all the nooks and crannies.

Another option is to drizzle some oil onto a clean rag and then wipe down the BCG. This method will require you to reapply oil more frequently, but it can be helpful if you are shooting in extremely dusty or dirty conditions.

Whichever method you choose, be sure to avoid getting any oil on the buffer or buffer spring as too much oil can cause reliability issues. Also, be sure to clean and lubricate your BCG after every shooting session to prevent the buildup of dirt and grime.

How to oil BCG?

Antony answered 2 years ago

Oiling your BCG is an important part of maintaining your firearm. Without proper lubrication, your weapon can suffer from premature wear and damage. Fortunately, it’s easy to keep your BCG properly lubricated with just a few simple steps.

How to oil BCG?

First, make sure that you are using the proper type of oil for your gun. Different firearms require different types of oil, so consult your owner’s manual to determine which oil is best for your gun. Once you have the right oil, apply a generous amount to all moving parts of the BCG, including the bolt carrier and gas key. Work the bolt back and forth to distribute the oil evenly, then wipe away any excess oil with a clean cloth.

It’s important to oil your BCG regularly, especially if you live in a dry or dusty environment. A good rule of thumb is to oil your BCG after every range session, or at least once a week if you don’t shoot often. With proper lubrication, your BCG will stay in good condition and help keep your firearm running smoothly.

Jordan Staff answered 2 years ago

It’s quite simple to oil a BCG (bolt carrier group).

Just make sure you have a quality oil and follow these steps:

1. Remove the charging handle and firmsly hold the BCG in your non-firing hand.

2. Put a small amount of oil on your finger and apply it to the gas key (the part of the BCG that sticks up). Make sure you get good coverage but don’t soak it.

3. Then, apply oil to the bolt itself. Again, good coverage but don’t soak it.

4. Use a clean rag to wipe off any excess oil.

5. Reassemble your rifle and you’re good to go!

How to oil BCG?

Cruz Staff answered 2 years ago

When it comes to oiling your BCG (Bolt Carrier Group), there are a few things you need to keep in mind.

First and foremost, you want to make sure that you’re using quality oil. There are a lot of gun oils on the market, but not all of them are created equal. You want to use an oil that is designed specifically for firearms, as it will be less likely to break down and cause issues over time.

Secondly, you want to make sure that you’re applying the oil correctly. You don’t want to over-oil your BCG, as this can cause problems down the line. A little bit of oil goes a long way, so just apply a light coat and you should be good to go. Thanks for the question!