FAQ – Questions & AnswersCategory: Remington FAQHow to load a Remington 11 87 shotgun?
Rick asked 2 weeks ago
How many shells does a Remington 11 87 hold?

5 Answers
Lewis Staff answered 2 weeks ago

There are a few things you need to know before loading a Remington 11-87 shotgun:

First, you need to make sure the gun is unloaded and pointed in a safe direction.

Second, you need to identify the type of ammunition you are using and make sure it is properly matched to your shotgun.

Finally, you need to follow the proper loading procedures for your specific shotgun.

To load a Remington 11-87 shotgun, first, insert the magazine tube into the receiver and press down on the cartridge follower until it locks into place. Then, slide a shell into the chamber and release the cartridge follower. Repeat this process until all shells have been loaded into the magazine tube. Finally, close the action of the gun by pulling the charging handle to the rear and releasing it.

We also recommend watching this video

Antony Staff answered 2 weeks ago

There are a few things you need to know before loading a Remington 11-87 shotgun:

  • You need to make sure the gun is unloaded and pointed in a safe direction.
  • You need to identify the ammunition type that is compatible with your shotgun.
  • You need to follow the proper loading procedures for your specific gun model.

In general, there are two types of shells that can be used in Remington 11-87 shotguns: slugs and buckshot. Slugs are solid projectiles that are fired from the barrel of the gun, while buckshot is a cluster of small pellets that spread out when fired. Depending on the type of game you’re hunting, you may want to use one or the other.

When loading a slug into the chamber of your Remington 11-87, it’s important to remember that the gun must be in the “slug” position. This can be done by either manually moving the slide release lever to the “slug” position, or by removing and reinserting the shotgun’s magazine. Once the gun is in the proper position, simply insert a slug into the chamber and close the action.

Buckshot can be loaded into the chamber of your Remington 11-87 regardless of whether the gun is in the “slug” or “magazine” position. To load buckshot, first, make sure that the magazine cap is fully tightened. Then, insert a buckshot shell into the chamber and close the action.

Once you have loaded the appropriate ammunition into your shotgun, you’re ready to head out into the field and start hunting! Just remember to always keep the gun pointed in a safe direction, and to follow all safety procedures when handling firearms.

How to load a Remington 11 87 shotgun?

Cruz Staff answered 2 weeks ago

There are a few things to keep in mind when loading a Remington 1187 shotgun:

  • First, make sure the gun is unloaded and pointed in a safe direction before you start.
  • Second, always use clean, dry shells.
  • Third, insert the shells into the magazine tube with the pointed end facing forward.
  • Fourth, hold the barrel down and rack the slide to chamber a round.
  • Finally, release the safety and fire away!

Remember to always keep your guns unloaded until you’re ready to use them and store them in a safe place where they can’t be accessed by children or unauthorized persons.

We also recommend watching this video

Ivan Staff answered 2 weeks ago
To load a Remington 11-87 shotgun, you’ll first need to open the breech and ensure that the gun is unloaded. Next, insert a shell into the loading port and press it firmly into place. Then, close the breech and pull back on the charging handle to chamber the round. Finally, release the safety and you’re ready to fire.
Guns are dangerous objects and should be handled with caution at all times. Make sure to read your gun’s instruction manual thoroughly before attempting to operate it, and always keep firearms unloaded until you’re ready to use them. Additionally, never point a gun at anything you don’t intend to shoot and be aware of your target and what’s beyond it.
 
How to load a Remington 11 87 shotgun?

Jordan Staff answered 2 weeks ago
The Remington Model 11-87 is a gas-operated, semi-automatic shotgun designed by Remington Arms Company. It was first produced in 1987.
To load a Remington 11-87 shotgun, insert a shell into the loading port on the right side of the receiver. Push it fully in with your fingers, and then release it so that the bolt picks it up and chambers it. Repeat this process until the shotgun is loaded. Always make sure that the barrel is pointing in a safe direction when loading or unloading your weapon.