Before cerakoting a rifle scope, it is important to understand the different types of coatings and how they will benefit your equipment. Rifle scopes can be coated with a matte finish, a glossy finish, or a satin finish. The type of coating you choose will depend on the look you are trying to achieve and the level of protection you need.
Matte-coated rifle scopes are ideal for those who want to keep their equipment looking as original as possible. They also offer limited protection against scratches and abrasion.
Glossy-coated rifle scopes are perfect for those who want their equipment to stand out from the crowd. They offer good protection against scratches and abrasion, but they are not as durable as matte-coated scopes.
Satin-coated rifle scopes offer the best of both worlds. They have a sleek, modern look that will make your equipment stand out from the crowd. They also offer excellent protection against scratches and abrasion.
It is important to note that coated rifle scopes require more care than uncoated scopes. Coated scopes should be cleaned with a soft, dry cloth. Avoid using harsh chemicals or cleaners on coated scopes, as this can damage the coating. When storing your coated scope, make sure to keep it in a clean, dry place away from direct sunlight.
Here are the steps you need to take to cerakote a rifle scope:
- Remove the scope from your rifle.
- Thoroughly clean all surfaces of the scope with denatured alcohol or another degreasing agent.
- Sand all surfaces of the scope until they are completely smooth.
- Apply a coat of primer to all surfaces of the scope.
- Apply a coat of Cerakote in the color of your choice to all surfaces of the scope.
- Allow the Cerakote to cure for 24 hours.
- Reattach the scope to your rifle.
Cerakote is a ceramic-based finish that can be applied to metals, plastics, and other materials. It is often used to protect firearms from wear and corrosion, and it can also be used to change the color of the firearm.
When cerakoting a rifle scope, it is important to make sure that all of the surfaces are clean and free of any oils or contaminants. The scope should then be degreased using a commercial degreaser or409 stainless steel cleaner. The next step is to apply the Cerakote primer. This will help to ensure that the finish will adhere properly to the surface of the scope.
Once the primer has dried, you can begin applying the Cerakote finish in thin coats. It is important to allow each coat to dry completely before applying the next one. Once you have applied the desired number of coats, you can then bake the scope in an oven at 400 degrees Fahrenheit for 30 minutes to cure the finish.
Cerakote is a popular choice for finishing rifle scopes because it provides excellent protection against wear and corrosion. It is also available in a wide range of colors, so you can customize the look of your scope to match your style.
Here’s a great tutorial on how to cerakote a rifle scope:
First, make sure you have all of the necessary materials and equipment. This includes the following:
- Cerakote firearm coating
- Gunmetal gray Cerakote powder
- High-temperature masking tape
- Oven or heat gun
- Clean rags
- Safety glasses
Now that you have all of the necessary materials and equipment, you can begin the process of cerakoting your rifle scope. The first step is to clean the surface of the scope with a clean rag. Next, apply a light coat of gunmetal gray Cerakote powder to the surface using a brush or roller. Once the powder has been applied, allow it to dry for the recommended time.
After the powder has dried, you can now begin to apply the Cerakote firearm coating. Begin by applying a light coat to the surface of the scope using a brush or roller. Once the first coat has been applied, allow it to dry for the recommended time. Once the first coat has dried, apply a second coat of gunmetal gray Cerakote powder to the surface. Allow this second coat to dry for the recommended time.
Once the second coat of gunmetal gray Cerakote powder has dried, you can now begin to apply high-temperature masking tape to the surface of the scope. Be sure to apply the masking tape in a well-ventilated area. Once the masking tape has been applied, you can now bake the scope in an oven or using a heat gun. The recommended baking time is 30 minutes.
After the scope has been baked, you can now remove the high-temperature masking tape. Be sure to do this in a well-ventilated area. Once the masking tape has been removed, you can now apply a third coat of gunmetal gray Cerakote powder to the surface. Allow this third coat to dry for the recommended time.
Your rifle scope is now ready for use!
Cerakote is a ceramic coating that can be applied to firearms, knives, and other objects. It’s available in a variety of colors and finishes, and it’s known for its durability and resistance to scratches, corrosion, and wear.
To cerakote a rifle scope, you’ll need to remove the old finish (if there is one) and then clean the surface thoroughly. You’ll also need to apply a primer coat before you apply the Cerakote. Be sure to follow the manufacturer’s instructions closely so that you achieve the best results.
Cerakote is applied using an airbrush and must be baked in an oven to cure. The oven temperature will vary depending on the object being coated, but typically it is cured at around 325 degrees Fahrenheit.
Applying Cerakote to a rifle scope will protect it from scratches and corrosion and will also help to reduce glare. It is a good idea to apply a coat of Cerakote every time you clean your rifle scope.
Please login or Register to submit your answer