FAQ – Questions & AnswersCategory: GeneralHow much cerakote to cover a rifle?
Kathryn Dean asked 1 hour ago

6 Answers
Antony Staff answered 1 hour ago

The amount of cerakote needed to cover a rifle will depend on the size and shape of the rifle. A good rule of thumb is to estimate about 1/2 ounce of cerakote per square foot of surface area. So, for example, a typical AR-15 with a 20″ barrel and standard handguard would require approximately 10 ounces of cerakote. If you’re unsure how much cerakote you need, it’s always best to err on the side of too much rather than too little. Once mixed, any excess cerakote can be stored for future use.

When applying Cerakote, it’s important to follow the manufacturer’s instructions carefully. In general, you’ll want to apply a thin, even coat of cerakote to the surface and then bake it in an oven according to the manufacturer’s specifications. This will ensure that the finish is durable and long-lasting.

Once your rifle is coated with cerakote, you’ll need to take some extra steps to protect it from the elements. In particular, you’ll want to make sure that the firearm is properly cleaned and lubricated regularly. This will help to prevent corrosion and keep the finish looking its best.

If you have any further questions about how to apply or maintain a cerakote finish on your rifle, please consult the manufacturer’s instructions or contact a qualified gunsmith for assistance.

How much cerakote to cover a rifle?

See also: we have selected for you Best Rifle Stock

Cruz Staff answered 1 hour ago

A single quart of Cerakote will usually cover around 4-6 rifles, depending on the size of the firearm and how liberally you apply it.

For example, an AR-15-type rifle will use approximately 4 ounces per coat, while a bolt action rifle may only require 2-3 ounces.

Generally speaking, it is better to err on the side of using too much Cerakote rather than too little. The two little coatings can leave exposed metal susceptible to corrosion, while too much coating can simply be scraped or sanded off when desired. As always, follow the manufacturer’s instructions for the best results.

How much cerakote to cover a rifle?

Ivan Staff answered 1 hour ago

There Coverage Calculator on the Cerakote website to help you determine how much product you will need to complete your project.

Simply select the specific coating and input the dimensions of your project to receive an estimate. You can always contact a local cerakote applicator for professional assistance.

Cerakote coatings are tough, durable and Laboratory Tested. Withstands temperatures exceeding 500°F and is protected against corrosion, abrasion, and ultraviolet light attack. The thickness of any applied coating will be inversely proportional to its longevity. The optimal thickness for greatest durability is between .001”- .003” (25 µm – 76 µm). If thinner coatings are desired/required, it is generally recommended to apply multiple thinner coats versus a single thick coat.

Cerakote can be applied to most substrates including metals, plastics, polymers, composites, hydrographic, and glass. The only substrate that cannot be coated with Cerakote is silicone.

How much cerakote to cover a rifle?

Olson Staff answered 1 hour ago

Applying a cerakote finish to a rifle can be done fairly easily, but there are a few things to keep in mind.

1. First, you’ll need to gather the following materials:

  • A can of cerakote (either black or clear)
  • An airbrush
  • High-pressure air compressor
  • Sandpaper (180 grit)
  • Sturdy work surface
  • Cups for thinning paint and for catching drips/excess paint

2. Next, prepare your work surface by setting up a sturdy table where you can lay out your rifle parts. Make sure the area is well-ventilated and protected from dust and other contaminants.

3. The next step is to disassemble your rifle, taking care to remove all scopes, optics, stocks, and other attachments. Once your rifle is disassembled, you’ll need to sand down the entire surface with 180-grit sandpaper. This will help the cerakote adhere to the metal surface.

4. Once the surface is prepared, you can begin applying the cerakote. Begin by mixing a small amount of cerakote with thinner in a cup, according to the manufacturer’s instructions. Next, using your airbrush, apply a thin layer of the mixture to the metal surface. Be sure to move the airbrush in even strokes to avoid leaving any drips or streaks. Allow the first coat to dry for about 15 minutes before applying a second coat. Again, be sure to apply the second coat evenly and allow it to dry completely before handling or reassembling your rifle.

Applying a cerakote finish to your rifle can help protect it from corrosion and wear, and can also give it a unique look. With just a few supplies and some careful application, you can easily refinish your rifle at home.

How much cerakote to cover a rifle?

Jordan Staff answered 1 hour ago

You’ll need about 2-3 ounces of cerakote to cover a rifle.

For example, if you’re using a 1/2 gallon kit, that will give you about 64 ounces of material.

If you want to cerakote just the forearm and grip, or other small areas, expect to use about half an ounce or less. When cerakoting metal surfaces, make sure that the area is prepped with a bead blaster (if possible), sandblasted, degreased, and blasted with denatured alcohol before starting your project. This will ensure good coverage and adhesion. Cleanliness is critical when working with cerakote!

How much cerakote to cover a rifle?

Lewis Staff answered 60 mins ago

On average, you will need one quart of Cerakote to cover a rifle.

This will vary depending on the exact model and make of the rifle, as well as how many coats you plan on applying. Always consult your gun’s manufacturer for guidance on the best way to care for your specific model.