FAQ – Questions & AnswersCategory: AK-47 FAQHow to use AK 47 rear sight?
Henry Gill asked 4 weeks ago
How does an AK sight work?

4 Answers
Olson Staff answered 4 weeks ago

The AK-47 rear sight is adjustable for windage and elevation.

The windage adjustment screw is located on the right side of the sight, while the elevation adjustment screw is located on the top of the sight.

To adjust windage, loosen the screw on the right side of the sight with a flathead screwdriver, then use a thumb to move the rear sight in the desired direction.

To adjust elevation, loosen the screw on top of the sight with a flathead screwdriver, then use a coin or other small object to turn it in either direction. Be sure to tighten both screws when you’re finished making adjustments.

How to use AK 47 rear sight?

Cruz Staff answered 4 weeks ago

The AK-47 rear sight is a simple, yet a versatile tool that can be used for a variety of purposes. In this article, we will discuss the different ways in which you can use the rear sight on your AK-47, as well as some tips and tricks for getting the most out of this handy accessory.

First and foremost, the AK-47 rear sight can be used to adjust your rifle’s point of impact. This is done by adjusting the elevation and windage screws on the rear sight, which will move your shot placement up or down, left or right. It’s important to note that these adjustments should only be made while shooting at a target that is at least 100 yards away, as making adjustments at closer range can result in your shots hitting low and to the left or right of your intended point aim.

Another common use for the AK-47 rear sight is to help you estimate range. The rear sight on the AK-47 is marked with 100, 200, and 400-meter increments, which can be used to help you determine how far away your target is. Simply line up the top of your front sight post with the appropriate mark on the rear sight, and you will have a pretty good idea of how far away your target is. This method is not always accurate, but it’s a good way to get a general idea of the range.

How to use AK 47 rear sight?

Finally, the AK-47 rear sight can also be used as a makeshift scope. This is done by folding down the leaf sight, which will give you a clear view of your target through the rear sight aperture. While this isn’t the most accurate way to shoot, it can be handy in a pinch and can help you make shots that you wouldn’t otherwise be able to make.

So there you have it, three different ways to use the AK-47 rear sight. Be sure to experiment with all three methods to find out which one works best for you. And remember, practice makes perfect!

Ivan Staff answered 4 weeks ago

AK 47 rear sight – how to use it?

The AK 47 rear sight is adjustable for elevation and windage:

  • For elevation, loosen the set screw on the right side of the sight, then adjust the sight up or down as needed. Tighten the screw when you’re finished.
  • For windage, loosen the screws on either side of the sight, then adjust it left or right as needed. Again, tighten screws when finished.

Be sure to test your shots to ensure that your adjustments were successful.

How to use AK 47 rear sight?

Antony Staff answered 4 weeks ago

AK 47 rear sight can be used to adjust elevation and windage.

To adjust elevation, you need to loosen the two screws on the rear sight and then move it up or down.

To adjust windage, you need to loosen the screw on the right side of the rear sight and then move it left or right.

Make sure to tighten all screws after adjusting.

How to use AK 47 rear sight?