FAQ – Questions & AnswersCategory: Ammo FAQHow to reload 5.56 ammo?
Otis Barton asked 4 months ago
Is it good to reload your own ammo?

4 Answers
Ivan Staff answered 4 months ago

Reloading 5.56 ammo is a relatively simple process, but it’s important to follow the correct steps to ensure that the rounds are safe to fire.

Here is a basic guide on how to reload 5.56 ammo:

1. Begin by sorting your brass casings into batches according to their caliber size.

2. Remove the bullets from each casing and discard them.

3. Use a powder scale to measure out the precise amount of powder for each batch of casings.

4. Fill each casing with powder using a funnel, making sure not to overfill them.

5. Seat the bullets back into each casing and use a tool like a bullet crimper to secure them in place.

6. Finally, inspect each round to ensure that it’s been properly loaded and that there are no defects.

Below is a video showing how to reload 223/5.56 ammo:

Cruz Staff answered 4 months ago

To reload 5.56 ammo, you will need the following supplies:

  • Shell holders
  • Primers
  • Powder
  • Bullets
  • Ammunition cases
  • Scale
  • Calipers
  • Chamber reamer or cleaning rod (to clean out the primer pocket)
  • Set of reloading dies for 5.56 NATO ammunition
  • Brass cleaner (optional)
  • Crimping tool (optional)

Once you have assembled all of your supplies, follow these steps:

1. Measure the powder charge using a scale. For reloading 5.56 ammo, use a powder charge of 24 to 26 grains. Do not exceed 26 grains, as this could damage your firearm.

2. Pour the powder into the ammunition case.

3. Use a set of calipers to measure the bullet diameter. For reloading 5.56 ammo, use a bullet diameter of 0.224 inches.

4. Seat the bullet in the ammunition case.

5. Use a shell holder to support the primer while you insert it into the primer pocket.

6. Use a chamber reamer or cleaning rod to clean out the primer pocket.

7. Insert the primer into the primer pocket.

8. Use a crimping tool to secure the bullet in place.

9. Repeat these steps for each piece of 5.56 ammo you wish to reload.

If you have any questions about reloading 5.56 ammo, or if you need help finding the supplies you need, contact a local ammunition dealer or gunsmith. They will be able to assist you and answer any questions you may have.

We also recommend watching a video on what it takes to start reloading ammunition

Jordan Staff answered 4 months ago

There are a few different ways to reload 5.56 ammo, but the most popular method is using a progressive reloading press. With this type of press, you can quickly and easily reload rounds by inserting the brass cartridge into the press, adding powder, seating the bullet, and crimping the case.

How to reload 5.56 ammo?

Another popular method for reloading 5.56 ammo is using a single-stage press. This type of press is slower but more precise than a progressive reloading press. It allows you to control all aspects of the reloading process so that each round is identical to the last.

How to reload 5.56 ammo?

No matter which reloading method you choose, it’s important to use quality components such as fresh brass cases, high-quality bullets, and reliable gunpowder. Using sub-par components can lead to dangerous situations such as misfires, case blowouts, and pressure issues.

When reloading 5.56 ammo, it’s also important to pay attention to the overall length of the round. The maximum length for a 5.56 round is 2.260 inches. If the rounds are too long, they can cause feeding problems in AR-15 rifles. Conversely, if the rounds are too short, they can cause chambering issues.

In general, 5.56 ammunition can be divided into two categories: full metal jacket (FMJ) and hollow-point (HP). FMJ rounds are typically used for target practice, while HP rounds are designed for self-defense and hunting.

  1. FMJ rounds are made with a solid lead core and a copper or steel jacket. The lead core helps the bullet expand when it hits a target, while the jacket prevents the bullet from disintegrating.
    How to reload 5.56 ammo?
  2. HP rounds are made with a hollow point in the center of the bullet. When the bullet hits a target, the hollow point expands and creates a larger wound channel. HP rounds are generally more expensive than FMJ rounds, but they are also more effective for self-defense and hunting applications.
    How to reload 5.56 ammo?

If you’re unsure about what type of 5.56 ammo to choose, then it’s always best to consult with a qualified gunsmith or firearms instructor. They can help you choose the right type of ammunition for your specific needs.

Antony Staff answered 4 months ago
Reloading 5.56 ammunition can be a great way to save money on ammo, but it’s also a process that should be approached with caution.
Here are the basic steps for reloading 5.56 ammo:
1. Start by disassembling the cartridge into its parts: the bullet, case, powder, and primer.
2. Use a reloading press to resize the brass case.
3. Fill the case with powder, being careful not to overfill it (a too-full case can lead to accidental detonation).
4. Seat the bullet in the resized case using your reloading press.
5. Crimp the cartridge using your reloading press to secure the bullet in place.
With these basic steps in mind, reloading 5.56 ammo can be a safe and enjoyable hobby. Just be sure to follow all safety precautions and always double-check your work to ensure accuracy.