If you’re a gun enthusiast, chances are you’ve come across the challenge of reloading blank 9mm ammo. While it may seem like a daunting task, with the right tools and a little patience, it can be surprisingly easy to do.
Here’s a step-by-step guide on how to reload blank 9mm ammo:
First, you’ll need to gather the following supplies:
- A supply of blank 9mm cases
- A Lee Loader Kit or similar reloading tool
- A mallet or hammer
- Reloading dies (optional)
- A press (optional)
Once you have all of your supplies gathered, the first step is to resize the blank cases. This can be done with a reloading die or a press, but the Lee Loader Kit makes it easy to do without either of those tools. Simply insert the case into the kit and squeeze the handle until the case is properly sized.
Next, you’ll need to prime the cases. This can be done with a hand primer tool or a press, but again, the Lee Loader Kit makes it easy to do without either of those tools. Simply insert the primer into the kit and squeeze the handle until the primer is properly seated.
Once your cases are resized and primed, it’s time to start loading them with blank 9mm Ammo. The easiest way to do this is with an Ammo loader, which can be purchased online or at most gun stores. Ammo loaders come in a variety of sizes, so make sure you get one that is compatible with the blank 9mm cases you are using. Simply insert the Ammo loader into the case and squeeze the handle until the case is full.
Once your cases are loaded, it’s time to crimp them. This step is important, as it ensures that the bullet will stay in place when the gun is fired. There are a few different ways to crimp a case, but the Lee Loader Kit makes it easy to do without any specialized tools. Simply insert the case into the kit and squeeze the handle until the case is properly crimped.
And that’s all there is to reloading blank 9mm Ammo! With a little patience and the right supplies, it’s easy to do. Just remember to always follow safety precautions when working with firearms and ammo.
Reloading your ammunition is a great way to save money and get exactly the rounds you want.
Here’s how to reload 9mm ammo:
1. Start by picking up a Reloading Kit. These usually come with everything you need to get started, including a reloading press, dies, and shell holders. Make sure you purchase primers and powder separately – these are regulated substances and usually not included in Reloading Kits.
2. Pick up some brass that has been fired from a 9mm pistol – this can be done at most gun ranges. Once you have your brass, it needs to be cleaned before you can start reloading it. You can do this by tumbling the brass in a Dillon case tumbler with some media.
3. Now that your brass is clean, it’s time to resize it. This step is important, as it ensures that your Ammo will fit in your gun’s chamber correctly. To do this, run the brass through a full-length die set. You may also need to trim the brass down to size – most 9mm brass is too long for reloading.
4. Once your brass is resized and trimmed, it’s time to add the primer. For this, you’ll need a small primer pocket swager. Insert the swager into the primer pocket of the brass, and then add a small amount of primer into the swager. Swage the primer pockets so that they’re slightly smaller than the primer you’re using.
5. Now it’s time to add the powder. For this, you’ll need a powder measure and a scale. Weigh out the appropriate amount of powder for your 9mm rounds, and then add it to the brass using the measure.
6. Finally, it’s time to seat the bullet. For this, you’ll need a bullet seating die and a bullet seater. Run the die down to size the mouth of the brass, and then seat the bullet to the correct depth. You can use a Lee factory crimp die to ensure that the rounds are correctly crimped.
With these simple steps, you can start reloading your own 9mm ammunition. Ammo reloading is a great way to save money and get exactly the rounds you want.
If you’re a gun owner, then at some point you’ll likely need to reload your ammunition. While it may seem daunting at first, reloading blank 9mm ammo is quite easy – and we’ll show you how.
When you’re reloading blank 9mm ammo, you will need to purchase a few items: brass casings, primers, bullets/projectiles, and gunpowder. You can find all of these items at your local gun store or online.
Once you have all of your supplies, the first step is to clean and inspect your brass casings. You’ll want to make sure that they are free of any dirt or debris. Next, you’ll need to prime your brass casings. To do this, simply insert a primer into the casing and then use a tool to seat it firmly in place.
Now, it’s time to add gunpowder to your brass casing. The amount of gunpowder you’ll need will depend on the type of ammunition you’re reloading. Once you’ve added the appropriate amount of gunpowder, you can now add your bullet/projectile. Again, the type of bullet you’ll need will depend on the type of ammunition you’re reloading.
The final step is to crimp your brass casing. This will ensure that everything stays in place when you fire your gun. Once you’ve crimped your casing, your blank 9mm ammo is now ready to be used.
Reloading blank 9mm ammo is a simple process that anyone can do. With just a few supplies and some simple instructions, you’ll be able to reload your ammunition in no time.
Here’s a step-by-step guide on how to reload 9mm Ammo:
1) Start with clean, dry brass cases. If you’re using used brass, it’s important to clean and inspect it first. Look for any signs of damage or wear and discard any questionable cases.
2) Decapping the case is the next step. This can be done with a handheld decapper or by running the cases through a press-mounted decapping died.
3) Once the cases are decapped, it’s time to resize them. This step is important to ensure reliable feeding and chambering in your firearm. Again, this can be done with a handheld tool or through a press-mounted sizing die.
4) The next step is to add the primers. This can be done by hand, but using a primer feeder will save time and effort.
5) Now it’s time to add the powder. This should be done with a powder measurer for accuracy. Be sure to follow the manufacturer’s guidelines on how much powder to use.
6) The final step is to seat the bullets. This can be done with a handheld tool or through a press-mounted seating die. Again, be sure to follow the manufacturer’s guidelines on bullet seating depth.
That’s it! You’ve now successfully reloaded your own 9mm Ammo. Remember to always practice safe reloading techniques and to follow the manufacturer’s guidelines. Happy shooting!
There are a few different ways to reload blank 9mm ammo.
The most common way is to use a loading block and a Lee Loader. First, you need to load the bullets into the loading block. Then, you will use the Lee Loader to Seat the primers into the cartridge cases. Finally, you will need to load the gunpowder into each cartridge case. Although this method is simple, it can be time-consuming.
If you want to save time, you can invest in a progressive reloading press. A progressive reloading press allows you to Reload ammunition faster than traditional methods. This type of press is automated and can seat primers, and load gunpowder, and bullet in one single process. If you plan on Reloading a lot of 9mm ammunition, a progressive reloading press is worth the investment.
Please login or Register to submit your answer