You’ll need some supplies before you start cleaning your rifle:
- gather a pillow or soft cloth to use as a work surface,
- gun cleaning solvent,
- gun oil,
- cotton swabs,
- a small screwdriver or pick.
1. Begin by making sure your rifle is unloaded. Remove the magazine (if applicable), open the action, and check the chamber to ensure no rounds are remaining in the firearm. For safety reasons, it is always best to clean your gun outside or in a well-ventilated space.
2. Once you have verified that the rifle is unloaded, disassemble it according to the manufacturer’s instructions. This usually means removing the bolt assembly and stock (if possible). If you are not familiar with your rifle’s assembly, consult the owner’s manual or contact the manufacturer.
3. With the rifle disassembled, start by cleaning the bore of the barrel. Use a cotton swab soaked in gun cleaning solvent and run it through the barrel from the chamber end to the muzzle. Repeat this process a few times until the cotton swab comes out clean. Once you have finished cleaning the bore, use a clean rag to wipe down the exterior of the barrel.
4. Next, move on to cleaning the bolt assembly. Use the small screwdriver or pick to remove any dirt or debris that may be caught in small crevices. Once you have dislodged any debris, wipe down the bolt assembly with a clean rag.
5. Once you have finished cleaning the bolt assembly and barrel, reassemble the rifle. Be sure to consult the owner’s manual if you are unsure of how to properly reassemble your rifle.
6. Finish up by applying a small amount of gun oil to a clean rag and wipe down the entire firearm. This will help protect it from rust and corrosion.
Products Needed for Cleaning a 22 Rifle:
- Solvents – WD-40, Mineral Spirits, Gun Scrubber, M-Pro 7 Gun Cleaner
- Lubricants – Firearm Grease, Silicone Grease, Hoppe’s No. 9 Lube
- Tools – Nylon Brushes (copper and brass), Jags or Patches, Swabs, Bore Light, Rods, and Accessories
1. Prepare your working area by clearing away all clutter and setting down some old newspapers or rags to protect your surfaces. Next, gather all of the products and tools you’ll need to clean your rifle.
2. Start by field stripping your rifle according to the manufacturer’s instructions. This will usually involve removing the bolt assembly and stock.
3. Once your rifle is field stripped, use a nylon brush to remove any dirt or debris from the barrel. Be sure to pay special attention to the breach end of the barrel where carbon buildup can occur.
4. Next, apply a solvent such as WD-40, Mineral Spirits, or Gun Scrubber to a clean patch and run it through the barrel several times. Allow the solvent to sit in the barrel for a few minutes before continuing.
5. Use a jag or patch to apply more solvent to the inside of the barrel and scrub vigorously with a nylon brush. Repeat this process until the patches come out clean.
6. Once the barrel is clean, apply a thin layer of firearm grease or silicone grease to a patch and run it through the barrel. This will help protect the metal from corrosion.
7. Reassemble your rifle according to the manufacturer’s instructions and you’re done!
Assuming you’re wondering how to field clean your 22lr rifle, the process is quite simple.
- Start by unloading your rifle and making sure the chamber is empty.
- Using a brass brush and some solvent, scrub the bore of your rifle until it is clean. Be sure to pay extra attention to the chamber area, as this is where most carbon buildup occurs.
- Next, use a cotton swab or patch to apply solvent to the bolt face and other moving parts. Use a small brush to remove any built-up grime, then wipe everything down with a clean rag.
- Once everything is nice and clean, apply a light layer of oil to all moving parts. This will help keep your rifle lubricated and functioning properly.
There are a few things you need to do to clean a 22 rifle properly.
- You will need a cleaning rod, some gun solvent, and some gun oil.
- You will also need some rags or cleaning patches.
Follow these steps and your gun should be clean in no time:
1) Make sure the gun is unloaded before proceeding! safety first!
2) Start by attaching the cleaning rod to the muzzle end of the barrel. run the rod through the bore a few times to remove any dirt or debris that may be present.
3) Once the bore is clear, apply some of the gun solvents to a rag or patch. wrap this around the cleaning rod and run it through the bore again. let the solvent sit for a few minutes to break down any residue that may be present.
4) After a few minutes, run the rod through the bore again to remove the solvent. apply some gun oil to a clean rag or patch and run it through the bore. this will protect the metal from corrosion and help keep your gun working properly.
5) Once you have finished oiling the bore, reassemble your gun and you are good to go!
The best way to clean a 22 rifle is to disassemble it and clean each part individually.
- Start by removing the stock, bolt, and magazine.
- Then, clean the barrel with a bore snake or rod and patch. Use a small brush and cleaning solution to scrub the chamber, making sure to get all the carbon buildup out.
- Once the chamber is clean, reassemble the rifle and move on to cleaning the action. Action care kits are great for this purpose and will help keep your 22 rifles in top condition.
- Be sure to also oil all moving parts after cleaning to keep them functioning properly.
Please login or Register to submit your answer